cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Choose one of the topics below for Cisco DNA Center Resources to help you on your journey with Cisco DNA Center

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.

369
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco DNA Plug and Play C9300

Hello Together

Currently I set up a DNA-PnP station to configure the Cisco 9300 switches.

Unfortunately the switches do not connect to the Cisco DNA.

This is the error message, I can't get any further!

 

Info: I changed the domain to domain.XYZ.xyz

 

*Sep 6 06:36:57.481: %SMART_LIC-5-SYSTEM_CLOCK_CHANGED: Smart Agent for Licensing System clock has been changed
CRYPTO_PKI: setting trustpoint policy TP-self-signed-2477683153 to use keypair TP-self-signed-2477683153% Generating 2048 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 1 seconds)

*Sep 6 06:36:59.767: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
*Sep 6 06:36:59.811: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi
*Sep 6 06:36:59.829: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Sep 6 06:37:00.399: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2477683153 has been generated or imported by crypto-engine
*Sep 6 06:37:00.401: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Sep 6 06:37:00.440: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Sep 6 06:37:00.507: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2477683153.server has been generated or imported by crypto-engine
*Sep 6 06:37:00.857: %PKI-6-TRUSTPOOL_DOWNLOAD_SUCCESS: Trustpool Download is successful
*Sep 6 06:37:00.861: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://pnpserver.domainXYZ.xyz:443/pnp/HELLO
*Sep 6 06:37:07.915: %PLATFORM_PM-6-FRULINK_INSERTED: 2x25G uplink module inserted in the switch 1 slot 1
*Sep 6 06:37:09.506: %AN-6-AN_ABORTED_BY_CONSOLE_INPUT: Autonomic disabled due to User intervention on console. configure 'autonomic' to enable it.
*Sep 6 06:37:10.722: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
*Sep 6 06:37:10.724: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Sep 6 06:37:10.725: %SMART_LIC-5-COMM_RESTORED: Communications with the Cisco Smart Software Manager or satellite restored
%Error opening tftp://255.255.255.255/network-confg (Timed out)
*Sep 6 06:37:30.882: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://10.68.37.20:443/pnp/HELLO
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
*Sep 6 06:38:37.095: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://18.205.166.131:443/pnp/HELLO
%Error opening tftp://255.255.255.255/router-confg (Timed out)
%Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out)
 

Thanks for your help!

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Re: Cisco DNA Plug and Play C9300

I fixed the problem.
I put in the DHCP option 43 the NTP-Server with the „Zxxx.xxx.xxx.xxx“ parameter.
2 REPLIES 2
Cisco Employee

Re: Cisco DNA Plug and Play C9300

What is the enterprise IP or VIP (if configured) of your DNAC?

Beginner

Re: Cisco DNA Plug and Play C9300

I fixed the problem.
I put in the DHCP option 43 the NTP-Server with the „Zxxx.xxx.xxx.xxx“ parameter.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards