cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
396
Views
0
Helpful
2
Replies
Johannes_Grimm
Beginner

Image Repository: C4506-E Sup 7 and 8

Hello community,

 

we have some Cisco Catalyst 4506-E Switches with Sup 7 and Sup 8. 

 

There are different recommended images for these two types.

 

Sup7: cat4500e-universalk9.SPA.03.08.07.E.152-4.E7.bin

Sup8: cat4500es8-universalk9.SPA.03.08.07.E.152-4.E7.bin

 

The DNA Center does not differentiate between these two sups in the image repository. So that means that I can only create a golden image for both types of supervisors, which of course is not desired.

Do you have any solution for this? I first thought I could distinguish the switches on the Role, but here there are only the areas of access, distribution and so on.

 

Best regards,

Johannes

2 REPLIES 2
Johannes_Grimm
Beginner

I have just learned that the 4500E Sup7 is not supported by the DNA Center. Only 4500E Series Switches (Supervisor Engine 8-E, 9-E) are supported with IOS XE 3.10.2E in combination with DNA 1.2.10

 

-> https://www.cisco.com/c/en/us/solutions/enterprise-networks/software-defined-access/compatibility-matrix.html

 

But maybe someone still has an idea how I can regroup the switches?

Hi Johannes,

It depends on what you're trying to accomplish. If you want too add Sup7E / 7LE to inventory and do assurance/SWIM/Topology then then is fine: https://www.cisco.com/c/en/us/support/cloud-systems-management/dna-center/products-device-support-tables-list.html

Cisco SD-Access on S7E/S7LE however will never be possible.

Jerome

This widget could not be displayed.