ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!

  • Register for the monthly Cisco DNA Center Ask the Expert Sessions to learn about Cisco DNA Center configuration and deployment.
  • 249
    Views
    5
    Helpful
    3
    Replies
    Highlighted
    Enthusiast

    IP Transit handoff configuration problem

    Hi,

    I have a pretty simple setup with a single 9300 Switch as C|B|E and configured 2 VNs on the device.

    I am not trying to make a handoff towards a router but I cannot get the DNAC to bush the Border configuration to the device.

    Every time I try it only gives me an error with:

    Provisioning failed due to invalid parameter. The interface gigabitethernet1/0/24 on Device a6aa*******16 has an IP, remove the IP and then use the interface.

     

    On interface Gi1/0/24 i have the following configuration and I have resynced the device:

    interface GigabitEthernet1/0/24
     device-tracking attach-policy IPDT_MAX_10
    end

    Any advise would be appreciated.

    1 ACCEPTED SOLUTION

    Accepted Solutions
    Highlighted
    Enthusiast

    Re: IP Transit handoff configuration problem

    5 minuttes later everything worked.

    View solution in original post

    3 REPLIES 3
    Highlighted
    Enthusiast

    Re: IP Transit handoff configuration problem

    5 minuttes later everything worked.

    View solution in original post

    Highlighted
    Beginner

    Re: IP Transit handoff configuration problem

    Hi, nice it worked.
    Just wanted to share a tip:
    Have a look at Kibana (System Settings > Sytem 360 > Log Explorer) and search for: log:error AND <device ip address>
    It will show you a more detailed error message - helped me a lot in such szenarios. (:

    .:|:..:|:.Please rate helpful posts.:|:..:|:.
    Highlighted
    Enthusiast

    Re: IP Transit handoff configuration problem

    Looks like logs are not configured per default?

    Looks like you don't have any logging indices.
    Let's add some!

    Or am I in the wrong place?

    Content for Community-Ad