cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
17819
Views
15
Helpful
6
Replies

ISR 4331 - IOX command not available - running 16.6.3 (Everest)

Alex Willoughby
Level 1
Level 1

Hi all,

 

Im trying to enable Guestshell on my ISR4331 but need to enable iox first, when I go to enable fox the command is not recognised, neither is any box command.

 

im running 16.06.03 Everest, sample output below

 

 

STR-LAB-01-RTR-01#guestshell run python
 iox feature is not enabled
STR-LAB-01-RTR-01#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
STR-LAB-01-RTR-01(config)#iox
                           ^
% Invalid input detected at '^' marker.

STR-LAB-01-RTR-01(config)#

any ideas?

Thanks

6 Replies 6

this is odd, I go through the guide follow it exactly and output as per the below: -

LAB-01-RTR-01(config)#virtual-service
^
% Invalid input detected at '^' marker.
LAB-01-RTR-01(config)#virt
LAB-01-RTR-01(config)#virtual-?
virtual-profile virtual-template

 

 

I have the same problem about enable iox feature. Is there any solution? 

Note this line from the guide referenced above:

 

There is a minimum memory and storage requirments they are: 8GB RAM, 20GB SATA harddisk or SSD

 

If the router doesn't have an SSD installed, these iox and guestshell commands aren't available.

I am running 16.9.4 with same issue.

I do have 8gb RAM & 20G Hard drive.

LAB#show ver | inc memory
cisco ISR4331/K9 (1RU) processor with 3832318K/6147K bytes of memory.
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
3125247K bytes of flash memory at bootflash:.
LAB#show harddi
LAB#show harddisk:
-#- --length-- ---------date/time--------- path
1 4096 Oct 21 2019 14:05:44.0000000000 +00:00 /vol/harddisk/
2 16384 May 14 2015 16:18:34.0000000000 +00:00 /vol/harddisk/lost+found
3 716 Nov 06 2015 16:44:31.0000000000 +00:00 /vol/harddisk/vlan.dat
4 9766 Nov 09 2015 19:02:50.0000000000 +00:00 /vol/harddisk/waas253rtr-confg
5 4096 May 30 2018 19:10:59.0000000000 +00:00 /vol/harddisk/virtual-instance

20064063488 bytes available (40960 bytes used)

in My case it turned out to be booster license feature . I had to disable this feature & reboot the router.

no platform hardware throughput level boost .

 

HTH 

Sincerely

Viral Patel

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: