cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
595
Views
0
Helpful
1
Replies
andrei.voicu
Beginner

LoRa iU880B-usb data sending on IOx

Hello, I'm trying to simulate data sending over iU880B LoRa device (https://wireless-solutions.de/products/gateways/iu880b-usb.html) from IOx. Can someone help me on how can I do that?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Steve Zhang
Cisco Employee

Hi Andrei,

Basically the USB for IR8x9 IOx support the general serial interface or USB storage for the USB interface currently.

If you have software drivers and the LoRa stack implemented on its USB dongle hardware, you may use a generic serial interface for communication. Or if the USB dongle needs IOx software drivers and a LoRa stack, IOx does not support it yet. Hope it helps.


Thanks,

Steve

View solution in original post

1 REPLY 1
Steve Zhang
Cisco Employee

Hi Andrei,

Basically the USB for IR8x9 IOx support the general serial interface or USB storage for the USB interface currently.

If you have software drivers and the LoRa stack implemented on its USB dongle hardware, you may use a generic serial interface for communication. Or if the USB dongle needs IOx software drivers and a LoRa stack, IOx does not support it yet. Hope it helps.


Thanks,

Steve

View solution in original post

Content for Community-Ad