Since then, I received two PWR-60W-AC-V2= power supples from Cisco that were pre-fitted with Molex connectors. BUT, those Molex connectors do not quite click in, so one can use them, but they will become dislodged quite easily. So, some hacking is required there also, illustrated above.
Meanwhile, the original DIY effort from above for the IR829 was repurposed for the IR809, and that is also illustrated in the GitHub project above.
If you are required to retrieve the gateway serial number from an IOx application, environment variables set by the Cisco Application Framework (CAF) are automatically set in the execution environment in the /data/.env file.
You can access th...
How to I get the gateway Cellular RSSI from Cisco IOx ?
If you have an IOx application that requires tp capture the cellular modem signal strength (for example to include in telemetry data along with GPS position and map signal with location), you will f...
Please refer to Release Notes for Cisco IOx Release 1.5.0 - Cisco for details.
Edge Computing with Cisco IOx at learninglabs.cisco.com
Cisco Fog Director...
You may refer to FAQ in DevNet site. Here it highlights some of them and add some more from IOx community.1. What devices run IOx?Find up to date information at Platform Support Matrix2. How to connect a Terminal or PC to IR800 Console Port?Please refer t...
The official release of Cisco IOx 1.3 is now out and ready to upgrade your edge computing ninja tool belt.Greater scale for your applications. In this release, you can now deploy your applications to up to 150,000 IOx connected devices using Fog Director ...