cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

PLEASE NOTE: The Kinetic developer discussions are moving to the main Kinetic board.
You should get a more active community response there.

Download Kinetic Manufacturing Starter Solutions-2.0

1502
Views
1
Helpful
5
Comments

Please download Kinetic Manufacturing Starter Solutions-2.0 (starter kit) from: Cisco Systems CCO

It covers the two modules below:

  • Energy Monitoring
  • Equipment Health Monitoring

You may access the below links once you installer and configured them successfully.

For the deployment guide, please refer to Cisco Kinetic Manufacturing Starter Solutions of EM and EHM 2.0 Deployment Guide.pdf.

Comments
Cisco Employee

Is there an Install Guide somewhere that covers initial installation & configuration? This appears to be an Ubuntu VM that boots to a login prompt.  Where do you go from there?

Cisco Employee

The guide is in the progress of uploading to cisco.com. Please stay tuned.

Cisco Employee

Hi Steve, Can you also please upload the Quick Starter Guides (QSG) for the Energy Monitoring and Equipment Health Monitoring modules onto this thread. That would be really helpful.

Cisco Employee
This widget could not be displayed.