Cisco LoRaWAN Blogs

350 Views

0 Comments

Just want to let you know that we posted IXM LoRaWAN 2.0.32 on Cisco.com. Tied to new LRR 2.4.21 package, it fixes the lowlvlgw.ini calibration table introduced on 2.0.20 and 2.0.30 security enhancements. LRR 2.4.21 is the mandatory LRR package to install... Read More

Everyone's tags (1):

517 Views

7 Comments

From 2.0.30, the privilege of LXC is downgraded to user level by the request from our SP customer. The "pcamap show" command in LXC will not show the true value of MAC address. bash-3.2# pcamap showMAC_ADDR: 00:00:00:00:00:00MODEL_NUM: VERSION_ID: MB_SERI... Read More

374 Views

0 Comments

Software Download - Cisco SystemsUpgrade Linux kernel to 4.4.52SHA256 for the firmware signature and ubootValidation of the firmware image before flashingLaunch processes as non-rootPassword protection in file systemRemoval of suid attribute in filesEnabl... Read More

1991 Views

11 Comments

************************************************************************IMPORTANT NOTE:This pre-installed native Semtech Packet Forwarder is strictly used for the lab validation only, not for any production or commercial purpose. Cisco did not execute any... Read More

468 Views

0 Comments

Download Software - Cisco Systems

1042 Views

6 Comments

Standalone Mode -Cisco Wireless Gateway for LoRaWAN Software Configuration Guide - CiscoVirtual IOS Interface Mode -Cisco IR800 Integrated Services Router Software Configuration Guide - Configuring Virtual-LPWA [Cisco 800 Series Industr…

318 Views

0 Comments

https://www.cisco.com/c/dam/en/us/products/collateral/se/internet-of-things/at-a-glance-c45-737308.pdf?referring_site=RE…

276 Views

0 Comments

https://www.cisco.com/c/en/us/products/collateral/se/internet-of-things/datasheet-c78-737307.html

Latest Contents

How to install semtech legacy packet-forwarder

Created by MoeMori on 01-08-2019 04:35 AM

Hi, I'm working on a Cisco Lora gateway and I have a problem with installing packet-forwarder. Gateway#show packet-forwarder infoPublicKeyStatus : Not InstalledFirmwareStatus : Not Installed How can I install the packet-forwarder... view more

How to know the autostart script running when IXM reboot

Created by nijie150810 on 09-19-2018 07:09 PM

Dear Folks: I use the IXM at standalone mode. I create a autostart script and put it into the container's etc/init.d. How can I know this script running when IXM reboot. Please help to advise Ni Jie

Developing own network server

Created by wamak on 09-18-2018 06:22 AM

Hi, Have anyone managed to configure IXM Lora gateway to forward lora data to other network server? Appreciate some guidance please. Thanks. Regards Mak

LoRa Gateway - Configuration of native packet forwarder for ...

Created by PaskoT on 09-05-2018 03:10 AM

I am having troubles with code that needs to be defined under start and stop functions in file S60pkt_forwarder_example. Can somebody please provide example code for start and stop functions?