How to access internet

Rajitkumar1508 · ‎10-13-2019

Hi am able to access internet from dmz boy not able to access. Internet from end devices. Any help is appreciated.thanks in advance.

Francesco Molino · ‎10-13-2019

Hi

Can you detail a little bit your issue with the device you're using and share maybe your config?

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question

Rajitkumar1508 · ‎10-14-2019

1.we created 4 vlans on the switch and connected to first router 1(R1).

2.configured router on stick on the 1st router(R1) and then connected the 1st router to the second router(R2) where we connected the DMZ and configured PAT.

3.PAT is working and DMZ host is able to access the internet but the PCS connected to the vlans arent able to get internet.

4 We are able to ping the dmz and the internet port but unable to get the internet access.

5,We used OSPFv1 and DHCP pool.

Francesco Molino · ‎10-14-2019

I understand R2 is doing nat. From your PCs can you reach R2 interface IP?
Can you share the subnet IP of your PCs and the nat configuration of your R2?

Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question