I'm working in a project and I'm trying to connect and monitor IoT devices.I connected the webcam and the Motion Detector, configured a Registration Server such that it turn on webcam whenever a motion detected also added conditions :Motion Detector On is true and Motion Detector On is false.
It's all working but there is a problem.Webcam is not showing the detection it looks like this:
instead of this :
should i change something in the physical part of the cam or what?I'm using Packet Tracer v.7.3.0
Quick Reference: Cisco IE5000 IRIG-B Support
Cisco Industrial Ethernet 5000 series switches (IE 5000) have integrated hardware support for external time sources: GPS antenna and IRIG-B (analog and digital timing I/O) interfaces. These interfaces are compl...
This document helps the user deploy Cisco Edge Intelligence on Cisco Gateways, configure the gateways to support EI in IOX and assist the user in building an environment to demo the capabilities of EI for both monitoring Modbus (TCP or RTU) and OPC-UA de...
From low data rate wireless, such as low-power-wide area technologies that are designed for small devices running on batteries, to the emergence of high data rate wireless technologies, such as 5G, and Wi-Fi 6, decision makers and network experts ...