45868 IPv4: "Time To Live" != 255 for a packet sent to the Local Network Control Block (see RFC 3171)
11 SSDP: NOTIFY * HTTP/1.1\r\n
625 TCP: Connection establish acknowledge (SYN+ACK): server port 443
5175 ICMPv6: No response seen to ICMPv6 request in frame 5175
2447 TCP: Duplicate ACK (#1)
Tried using Acrylic Maps and everytime I go to toggle on GPS so I can upload my heatmap they toggle it off,(x10) so I gave up tried installing Solar Winds and unable to do that or MetaGeek programming my comp system blocks it, changes two factor authentication on gmail, to tablet or random phone number and I dont have a CISCO product I have Hitron so it appears I have two computers on my system
In safe mode Ethernet 4 Remote NDIS based Internet Storing Device #2 Phy address 02 19 1b 49 32 57
ipv4 169.254.237.243.16 Ipv6 fe 80 b9 d8 2d17 bssb:edf3%19164 DNS 192.168.3.1
Integrated MAC 2C413891E4D6 Integrated SATA eSATA ports ATI HD audio Device IRQD ATI USB controller IRQS Broadcom Ethernet Controller IRQS Serial Port A SAT A0 System Audio SAT A1 SAT a2 Sar A3 SS WAKE on LAN Internal Speaker Enable PCI Express x8 enablePrinter mode EPP+ECP(dont have a printer) PCI SERR# Generation PCI VGA SNooping Amd SMBUS advanced Bus Options Legacy Device IRQ DMA Seriel Port a 3F8 3FF IRQ4 Linux ds_com2pcih_enc(1) Sessions RBSOA-def Mag Ephen NeutrinoDPS arms microcontrollers SYSBIOSdxdiaet Ultron Google Inc 2018.06.02 NOI.3 NMEA 0183 NMEA 2000 aci pnp Bell Mobility 3G HSPA LAC= afce CID dc4e07d
With EFM 1.7 release, some previous warnings are now treated as errors, hence ParStream does not start via Systemctl
Check the /var/log/parstream/server-xxxx.log file
You might see errors like:
ERROR-77082: Number of maximum f...
Q. Where can I find the Cisco Kinetic DemoKit Setup Guide?
A. Refer to the "Cisco Kinetic Demo Kit Guide" on Salesconnect (https://salesconnect.cisco.com/#/program/PAGE-10238 then under the "Demo Kit" tab)
Q. Where can I get support for the DemoKi...
Industrial customers are increasingly realizing the importance of digitization to compete and stay relevant in today's business environment. Any digitization efforts involve connecting thousands of sensors and devices to the network, extracting and proces...
This example shows ICPAM integration to VSM 7.12
Principal of operation:
SENSOR_CONNECTOR will connect to ICPAM & register the callback endpoint. Currently SENSOR_CONNECTOR is registering endpoint for all types of events available in ICPAM.
You have confirmed that EFM is running, and you can open a broker connection using port 8080 or 8443 from the EFM server. However, from an external broker, not hosted on the same machine, the connection is refused.
Is this is your fi...