Dear Team,
My cisco router 1841 is working fine but showing DSR=down and CTS=down why?
RRBMeerut_Bhojpur>
RRBMeerut_Bhojpur>
RRBMeerut_Bhojpur>sh int se0/0/0
Serial0/0/0 is up, line protocol is up
Hardware is GT96K Serial
Internet address is 10.17.221.18/30
MTU 1500 bytes, BW 64 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 15/255, rxload 35/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/5/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 48 kilobits/sec
5 minute input rate 9000 bits/sec, 7 packets/sec
5 minute output rate 4000 bits/sec, 6 packets/sec
38866 packets input, 5642586 bytes, 0 no buffer
Received 1525 broadcasts, 0 runts, 0 giants, 0 throttles
814 input errors, 812 CRC, 639 frame, 614 overrun, 0 ignored, 477 abort
42349 packets output, 4290868 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets 0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
2 carrier transitions
DCD=up DSR=down DTR=up RTS=up CTS=down
RRBMeerut_Bhojpur>
