cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
299
Views
0
Helpful
2
Replies
Beginner

Cisco router

Dear Team,

                My cisco router 1841 is working fine but showing DSR=down and   CTS=down why?

 

RRBMeerut_Bhojpur>

RRBMeerut_Bhojpur>

RRBMeerut_Bhojpur>sh int se0/0/0

Serial0/0/0 is up, line protocol is up

 Hardware is GT96K Serial

 Internet address is 10.17.221.18/30

 MTU 1500 bytes, BW 64 Kbit/sec, DLY 20000 usec,

 reliability 255/255, txload 15/255, rxload 35/255

 Encapsulation HDLC, loopback not set

  Keepalive set (10 sec)

  Last input 00:00:00, output 00:00:00, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: weighted fair

  Output queue: 0/1000/64/0 (size/max total/threshold/drops)

  Conversations  0/5/256 (active/max active/max total)

  Reserved Conversations 0/0 (allocated/max allocated)

   Available Bandwidth 48 kilobits/sec

  5 minute input rate 9000 bits/sec, 7 packets/sec

  5 minute output rate 4000 bits/sec, 6 packets/sec

  38866 packets input, 5642586 bytes, 0 no buffer

   Received 1525 broadcasts, 0 runts, 0 giants, 0 throttles

   814 input errors, 812 CRC, 639 frame, 614 overrun, 0 ignored, 477 abort

   42349 packets output, 4290868 bytes, 0 underruns

   0 output errors, 0 collisions, 4 interface resets  0 unknown protocol drops

   0 output buffer failures, 0 output buffers swapped out

   2 carrier transitions

  DCD=up   DSR=down   DTR=up  RTS=up  CTS=down

 

    RRBMeerut_Bhojpur>

Everyone's tags (1)
2 REPLIES 2
Highlighted
Beginner

Dear Team,                   

Dear Team,

                     Did not received any update.

Cisco Employee

Hi Sandeep, I'm sorry for the

Hi Sandeep,

 

I'm sorry for the late answer. Due to holidays we were a little short on resources during the last days.

Unfortunately your question was raised in the wrong supportforum. Cisco ServiceGrid is part of Software Enabled Services. We provide Integration Services.

However, you can raise your question in the right forum: https://supportforums.cisco.com/community/6016/lan-switching-and-routing

Our hardware professionals will be happy to provide you any answer you need.

 

thanks

Patrick

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.