cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3239
Views
10
Helpful
1
Replies

Problem QoS DSCP Matching with PPPoE

Hokleng
Level 1
Level 1

Hello All,

Currently i have problem with QoS DSCP marking to work with PPPoE. 
I configured my Router as PPPoE Server with BBA group: 

Router1##show running-config | se bba
bba-group pppoe global
virtual-template 1

 

- I configured class-map match with IP DSCP AF13 and below is policy-map which customer got under established PPPoE with router: 
Router1# show policy-map interface vi2.501 output

Virtual-Access2.501

SSS session identifier 257 -

Service-policy output: vcbtest

Class-map: cl-dscptest (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: dscp af13 (14)
police:
rate 51200000 bps, burst 9600000 bytes, peak-burst 19200000 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
violated 0 packets, 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps, violated 0000 bps

Class-map: class-default (match-any)
49799 packets, 26905509 bytes
30 second offered rate 1000 bps, drop rate 0000 bps
Match: any
police:
rate 5120000 bps, burst 960000 bytes, peak-burst 1920000 bytes
conformed 48955 packets, 25638379 bytes; actions:
transmit
exceeded 844 packets, 1267130 bytes; actions:
drop
violated 0 packets, 0 bytes; actions:
drop
conformed 1000 bps, exceeded 0000 bps, violated 0000 bps


As u can see above, there is no match on class-dscptest. 
I confirmed again, the ingress traffic was marked correctly with dscp AF13, But when egress go through (PPPoE Session)interface virtual-access, traffic is not marked. 

I don't what is problem about QoS with PPPoE. I try to verified with other interface on same router that not configured pppoe, traffic is marked normal. 

IOS Version:  Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.3(1)S1, RELEASE SOFTWARE (fc1)

1 Reply 1

cristoji
Cisco Employee
Cisco Employee
 
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: