cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1454
Views
30
Helpful
6
Replies
Highlighted
Beginner

Restart switch when enable logging facility

Hello everyone,

When i enable the command logging facility  and after enabled so the switch automatic go to restart after reboot and opened the ssh on the quickly to disable or remove the command, Below all command and ("192.168.1.25" my syslog server and Switch model 2960x and version 15.0(2a)EX5):

logging facility news

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

 

Any one can help to solve the problem?

THANKS

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Thank you for your replay,

If you can advice me whats the benefit to "logging facility news", After that I tried to upgrade the version from  version 15.0(2a)EX5 to last upgrade Version 15.2(6r)E , After that i tested the all same command in below

logging facility news

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

And the switch worked without any problem, In this time if i apply your command below

logging buffered 64000 <-- change the value as per your requirement

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

After that the switch worked without any problem where the version 15.0(2a)EX5 ? Or i forced to all switches upgrade to last Version 15.2(6r)E .

 

View solution in original post

6 REPLIES 6
Highlighted
VIP Expert

 

no logging facility news   <-- i do not belive you need this

logging buffered 64000  <-- change the value as per your requirement

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

 

Save config test and advise.

 

You still have issue, post show logging



BB


*** Rate All Helpful Responses ***

Highlighted

Thank you for your replay,

If you can advice me whats the benefit to "logging facility news", After that I tried to upgrade the version from  version 15.0(2a)EX5 to last upgrade Version 15.2(6r)E , After that i tested the all same command in below

logging facility news

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

And the switch worked without any problem, In this time if i apply your command below

logging buffered 64000 <-- change the value as per your requirement

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

After that the switch worked without any problem where the version 15.0(2a)EX5 ? Or i forced to all switches upgrade to last Version 15.2(6r)E .

 

View solution in original post

Highlighted

logging facility news   ( do you really need this usenet ?)

 

News USENET news

 

if the solution is resolved can you mark as resolve so it will be usefull for other community members,.



BB


*** Rate All Helpful Responses ***

Highlighted

If you can explain me whats the benefit to "logging facility news" ? or logging facility USENET news ?

Highlighted

High level :

 

NEws - Log Messages regarding USENET  news processes

 

If you like to more about technology, would nice to spend some time on RFC

 

https://tools.ietf.org/html/rfc5424

https://en.wikipedia.org/wiki/Usenet



BB


*** Rate All Helpful Responses ***

Highlighted

I'm solved the problem when upgrade the switch version from 15.0(2a)EX5 to Version 15.2(6r)E . 

If any one have the same problem please upgrade because the version 15.0(2a)EX5 have bug in software version .

THANKS

 

Content for Community-Ad

This widget could not be displayed.