2600 series firmware upgrade

[gregory.philippe@harmonicinc.c]

I have a 2600 series modular access router running the following: System image file is "flash:c2600-i-mz.123-3e.bin"

I want to know if there is a SW version that supports SSHv2.

[luis_cordova]

Hi gregory.philippe@harmonicinc.c,

 Check what this link indicates about SSHv2: 

Prerequisites

Requirements

The Cisco IOS image used must be a k9(crypto) image in order to support SSH. For example c3750e-universalk9-tar.122-35.SE5.tar is a k9 (crypto) image.

https://www.cisco.com/c/en/us/support/docs/security-vpn/secure-shell-ssh/4145-ssh.html

Regards