cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1124
Views
0
Helpful
3
Replies

Cisco ASA 5520 Firmware deleted

Hello guys,

I wanted to reinstall my asa 5520 (firewall s/n: JAF1550CKML) and erased all drives (it deleted the flash drive too)

Now I can't get anymore to the firmware, because I need a user ID to download any kind of images.id.PNG

I tried the whole day researching in the internet how to get the firmware.

Can someone please upload the firmware and send me a link to download ?

 

Thank you in advance :)

PS: The full output (if helps...):

 

Booting system, please wait...


CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Low Memory: 631 KB
High Memory: 2048 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
 00  00  00   8086   2578  Host Bridge
 00  01  00   8086   2579  PCI-to-PCI Bridge
 00  03  00   8086   257B  PCI-to-PCI Bridge
 00  1C  00   8086   25AE  PCI-to-PCI Bridge
 00  1D  00   8086   25A9  Serial Bus         11
 00  1D  01   8086   25AA  Serial Bus         10
 00  1D  04   8086   25AB  System
 00  1D  05   8086   25AC  IRQ Controller
 00  1D  07   8086   25AD  Serial Bus         9
 00  1E  00   8086   244E  PCI-to-PCI Bridge
 00  1F  00   8086   25A1  ISA Bridge
 00  1F  02   8086   25A3  IDE Controller     11
 00  1F  03   8086   25A4  Serial Bus         5
 00  1F  05   8086   25A6  Audio              5
 02  01  00   8086   1075  Ethernet           11
 03  01  00   177D   0003  Encrypt/Decrypt    9
 03  02  00   8086   1079  Ethernet           9
 03  02  01   8086   1079  Ethernet           9
 03  03  00   8086   1079  Ethernet           9
 03  03  01   8086   1079  Ethernet           9
 04  02  00   8086   1209  Ethernet           11
 04  03  00   8086   1209  Ethernet           5

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520
Management0/0
Ethernet auto negotiation timed out.
Interface-4 Link Not Established (check cable).


Default Interface number-4 Not Up


Use ? for help.
rommon #0> boot
Launching BootLoader...
Default configuration file contains 1 entry.
Boot mode is 1. Default entry is 1.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image


Default configuration file contains 1 entry.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image


Failsafe booting engaged.
Default configuration file contains 1 entry.

Searching / for images to boot.

No images in /
Error 15: File not found

unable to boot an image

▒

Booting system, please wait...


CISCO SYSTEMS
Embedded BIOS Version 1.0(11)5 08/28/08 15:11:51.82

Low Memory: 631 KB
High Memory: 2048 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
 00  00  00   8086   2578  Host Bridge
 00  01  00   8086   2579  PCI-to-PCI Bridge
 00  03  00   8086   257B  PCI-to-PCI Bridge
 00  1C  00   8086   25AE  PCI-to-PCI Bridge
 00  1D  00   8086   25A9  Serial Bus         11
 00  1D  01   8086   25AA  Serial Bus         10
 00  1D  04   8086   25AB  System
 00  1D  05   8086   25AC  IRQ Controller
 00  1D  07   8086   25AD  Serial Bus         9
 00  1E  00   8086   244E  PCI-to-PCI Bridge
 00  1F  00   8086   25A1  ISA Bridge
 00  1F  02   8086   25A3  IDE Controller     11
 00  1F  03   8086   25A4  Serial Bus         5
 00  1F  05   8086   25A6  Audio              5
 02  01  00   8086   1075  Ethernet           11
 03  01  00   177D   0003  Encrypt/Decrypt    9
 03  02  00   8086   1079  Ethernet           9
 03  02  01   8086   1079  Ethernet           9
 03  03  00   8086   1079  Ethernet           9
 03  03  01   8086   1079  Ethernet           9
 04  02  00   8086   1209  Ethernet           11
 04  03  00   8086   1209  Ethernet           5

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(11)5) #0: Thu Aug 28 15:23:50 PDT 2008

Platform ASA5520
Management0/0
Ethernet auto negotiation timed out.
Interface-4 Link Not Established (check cable).


Default Interface number-4 Not Up


Use ? for help.
rommon #0>

 

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

If the kit under smartnet contract, cisco TAC able to asists you proving the ASA code.

 

by the way what is the version of ASA code you running before you delete them all ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Thank you for your time @balaji.bandi , but I asked a college of my father because he has a Cisco Account, where he gets the Support and Downloads. I really appreciate your Intention to help. If later on there are similar problems I contact you if you agree. :) 


@balaji.bandi wrote:

If the kit under smartnet contract, cisco TAC able to asists you proving the ASA code.

 

by the way what is the version of ASA code you running before you delete them all ?

 


 

sure happy to help any further queries you have

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help