03-21-2023 09:11 AM
Hi,
I am running the Reload at Command on one of our Client router C892FSP-K9, however it is giving me an error to set time and date first.
The Date and time is set via NTP
#reload at 3:30 23 march
%The date and time must be set first.
#sh clock detail
*16:07:25.297 UTC Tue Mar 21 2023
Time source is NTP
03-23-2023 07:03 AM
Hello @dineshgawde
It's possible that the router's timezone is not set correctly, which can cause issues with scheduling reloads.
If the issue persists, you can try setting the date and time manually ; after setting the clock manually, you should be able to schedule the reload using the "reload at" command.
03-23-2023 07:24 AM
Hi M02@rt37 Thank you for the suggestion and help, I happen to figure out the time is set via NTP server which is currently broken. I need to either fix the NTP server configuration or Set the timer manually .
03-23-2023 07:27 AM
Ok @dineshgawde
set the time manually seem to be a good option first ; then fix the NTP Server.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: