cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
410
Views
0
Helpful
0
Replies

Cisco SG350 and SG350X Model Uplink Issue

Lee Win Neng
Level 1
Level 1

 

Hi all, 

 

I would like to seek for some advice on the issue that faced on uplink ports (TengigabitEthernet1/0/3) which the port will still remain up even I had unplugged the fiber cables (ping will lost). This port was having the exact same configuration on TengigabitEthernet1/0/4 as they are binding together as port-channel. 

 

Hardware Model = SG350 & SG350X

Current Firmware = 2.5.5.47 (Latest) and have been testing with 2.5.0.92 unfortunately still facing same issue.

 

So far, I discovered that the issue was faced only on port TengigabitEthernet1/0/3 but TengigabitEthernet1/0/4 was not having any issue. Furthermore, I have around 20 units of same model and all was facing the same issue on port TengigabitEthernet1/0/3 with SFP of "MGBLX1". 

 

Kindly need some advice on this abnormality and any solutions that I can take?

Thank you for your kind assistance.

 

 

0 Replies 0