Cisoc IOS issue : router booting into RMON

[muhammad_zahid]

Hi all,

Need some help with cisco router booting into Rmon mode...when I reload it is going into RMON mode....

cisco ISR4351/K9 (2RU) processor with 7932457K/6147K bytes of memory.
Processor board ID FDO2349M1RP
3 Gigabit Ethernet interfaces
2 Cellular interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
14659583K bytes of flash memory at bootflash:.
0K bytes of WebUI ODM Files at webui:.

Configuration register is 0x41

After giving the command, boot then it boot into IOS

Thanks

[Leo Laohoo]

---

@muhammad_zahid wrote:

Configuration register is 0x41

---

This will be the cause.

To fix this, do the following:

conf t
 config-registry 0x2102
end
wr

[balaji.bandi · Accepted solution]

Configuration register is 0x41

this config reg is the culprit. change this to "config-registry 0x2102"

Still not working - post complete boot log.