cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1229
Views
6
Helpful
7
Replies

%CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED: R0/0: cmand: Reloading

Dr.X
Level 2
Level 2
We have a 2nd hand ASR router. We have the module (F0 ASR1000-ESP10  ) either failing or rebooting forever.

with error console :

%CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED: R0/0: cmand: Reloading F0 because it has failed to come online


Router#sh platform
Chassis type: ASR1002
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-SIP10 ok 00:23:59
0/0 4XGE-BUILT-IN ok 00:20:10
0/1 SPA-1X10GE-L-V2 ok 00:20:10
0/3 SPA-1X10GE-L-V2 ok 00:20:10
R0 ASR1002-RP1 ok, active 00:23:59
F0 ASR1000-ESP10 booting 00:23:59
P0 ASR1002-PWR-AC ps, fail 00:21:41
P1 ASR1002-PWR-AC ok 00:21:41
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 07120202 16.3(2r)
R0 08011017 16.3(2r)
F0 N/A N/A


i upgraded the Romon to 16.x Ver but no luck :
Router#sh rom-monitor R0
*Jan 5 22:56:14.523: %CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED: R0/0: cmand: Reloading F0 because it has failed to come online
System Bootstrap, Version 16.3(2r), RELEASE SOFTWARE
Copyright (c) 1994-2016 by cisco Systems, Inc.


Cisco IOS XE Software, Version BLD_V155_1_S_XE314_THROTTLE_LATEST_20141202_050030-std
Cisco IOS Software, ASR1000 Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Experimental Version 15.5(20141202:070849) [v155_1_s_xe314_throttle-BLD-BLD_V155_1_S_XE314_THROTTLE_LATEST_20141202_050030-ios 167]
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 02-Dec-14 03:29 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
Router uptime is 22 minutes
Uptime for this control processor is 26 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1000rp1-adventerprisek9.BLD_V155_1_S_XE314_THROTT"
Last reload reason: Reload Command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ASR1002 (2RU) processor (revision 2RU) with 1647610K/6147K bytes of memory.
Processor board ID FOX1420H6R2
4 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7798783K bytes of eUSB flash at bootflash:.
122879936K bytes of USB flash at usb0:.
Configuration register is 0x2102



What shall I do at this stage ? is it a hardware or a software problem?

Thanks 




7 Replies 7

Already upgraded the Rom-on and its already on 16.3 
--------------

i upgraded the Romon to 16.x Ver but no luck :
Router#sh rom-monitor R0
*Jan 5 22:56:14.523: %CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED: R0/0: cmand: Reloading F0 because it has failed to come online
System Bootstrap, Version 16.3(2r), RELEASE SOFTWARE
Copyright (c) 1994-2016 by cisco Systems, Inc.
------------
 
But i mean with 16.3, i still see the same problem.
 
 

Where did this router come from?  

I am asking because the router is running a Cisco internal-only firmware, an "experimental" version.  

Upgrade the firmware of the router but I am suspecting the RP (router processor) is fried.

Using IOS asr1000rp1-adventerprisek9.03.13.00.S.154-3.S-ext.bin

did not solve the problem.

Is it a hardware issue?

Any help at this point ?

Sorry I totally forget you. I will deep dive to find solution since per-packet can not run in IOS XE

Contact Cisco TAC and organize an RMA.  

The RP, I suspect, is fried.