12-07-2020 09:08 PM
Hi team!
i have read the article https://www.cisco.com/c/en/us/support/docs/routers/4000-series-integrated-services-routers/210760-Monitor-CPU-Usage-On-ISR4300-Series.html
but i a little bit odd confused about wich command shoud i use to monitor the COU utilization\usage
current output is below. ISR4351 - isr4300-universalk9.16.09.06.SPA.bin\ System Bootstrap, Version 16.12(2r), RELEASE SOFTW
BORDER-ISR4351#show platform hardware qfp active datapath utilization sum CPP 0: 5 secs 1 min 5 min 60 min Input: Total (pps) 3985 4855 4533 4390 (bps) 12812416 20803784 18434480 17895008 Output: Total (pps) 3974 4847 4517 4381 (bps) 12818312 20802864 18432272 17900824 Processing: Load (pct) 2 3 3 3 BORDER-ISR4351#sh proc cpu platform sor | i CPU | ex 2* | i Core CPU utilization for five seconds: 19%, one minute: 22%, five minutes: 22% Core 0: CPU utilization for five seconds: 1%, one minute: 2%, five minutes: 2% Core 1: CPU utilization for five seconds: 2%, one minute: 2%, five minutes: 2% Core 2: CPU utilization for five seconds: 0%, one minute: 1%, five minutes: 1% Core 3: CPU utilization for five seconds: 0%, one minute: 0%, five minutes: 0% Core 4: CPU utilization for five seconds: 17%, one minute: 14%, five minutes: 16% Core 5: CPU utilization for five seconds: 68%, one minute: 60%, five minutes: 62% Core 6: CPU utilization for five seconds: 9%, one minute: 8%, five minutes: 10% Core 7: CPU utilization for five seconds: 82%, one minute: 85%, five minutes: 86% BORDER-ISR4351#sh proc cpu sorted | ex 0.00 CPU utilization for five seconds: 1%/0%; one minute: 1%; five minutes: 1% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 672 10907034 471833436 23 0.47% 0.54% 0.55% 0 IP SLAs XOS Even 122 2463826 14292024 172 0.23% 0.15% 0.14% 0 IOSXE-RP Punt Se 472 693798 29332127 23 0.15% 0.04% 0.02% 0 MMA DB TIMER 216 791544 58470344 13 0.07% 0.03% 0.02% 0 IP ARP Retry Age 213 865948 58470408 14 0.07% 0.04% 0.05% 0 IPAM Manager 126 1609739 116581930 13 0.07% 0.07% 0.07% 0 L2 LISP Punt Pro BORDER-ISR4351#show platform software status control-processor bri Load Average Slot Status 1-Min 5-Min 15-Min RP0 Healthy 1.81 1.73 1.80 Memory (kB) Slot Status Total Used (Pct) Free (Pct) Committed (Pct) RP0 Healthy 4027884 2903220 (72%) 1124664 (28%) 3129548 (78%) CPU Utilization Slot CPU User System Nice Idle IRQ SIRQ IOwait RP0 0 2.20 0.80 0.00 96.99 0.00 0.00 0.00 1 1.80 0.40 0.00 97.80 0.00 0.00 0.00 2 36.80 2.50 0.00 60.70 0.00 0.00 0.00 3 1.20 0.60 0.00 98.20 0.00 0.00 0.00 4 15.28 3.09 0.00 81.61 0.00 0.00 0.00 5 79.57 1.10 0.00 19.31 0.00 0.00 0.00 6 9.29 2.39 0.00 88.31 0.00 0.00 0.00 7 75.50 15.80 0.00 8.70 0.00 0.00 0.00
Solved! Go to Solution.
12-07-2020 09:46 PM
try #show processes memory platform sorted
here is ISR memory high troubleshoot tips
12-07-2020 09:15 PM
The router has 28% free memory left. I'd be careful with that.
12-07-2020 09:30 PM
yes i saw it. trying to find what could "eat" the MEM....
12-07-2020 09:46 PM
try #show processes memory platform sorted
here is ISR memory high troubleshoot tips
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: