WS-C4506-E Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.06.07.E RELEASE SOFTWARE (fc3)
System image file is "bootflash:cat4500e-universalk9.SPA.03.06.07.E.152-2.E7.bin"
ROM: 15.0(1r)SG11
Jawa Revision 7, Snowtrooper Revision 0x0.0x1C
if i write this command on this type of switch i get the output i want, that is the clock time, day, month, date and year that the link went down:
#Show interface link
Te1/2 3 years , 15 weeks, 16 hours, 6 minutes 50 secs 23:45:22 Mon Oct 14 2019
Te1/3 3 years , 15 weeks, 16 hours, 6 minutes 50 secs 23:45:22 Mon Oct 14 2019
Then we got a new switch C9407R and the same command does not give me the same output, i need the same timestamp info as before, is that possible?
C9407R Cisco IOS XE Software, Version 17.03.04
Cisco IOS XE Software, Version 17.03.04
Cisco IOS Software [Amsterdam], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.3.4, RELEASE SOFTWARE (fc3
ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 17.3.1r[FC2], RELEASE SOFTWARE (P)
Example:
#sh Interface link
Te3/0/2 47w1d
Te3/0/3 47w1d
Te3/0/4 47w1d
Te3/0/5 47w1d
Te3/0/6 47w1d
Te3/0/7 47w1d
Te3/0/8 00:00:00 47w1d
Fo3/0/9 47w1d
Fo3/0/10 47w1d
