01-21-2022 11:36 AM
Hello Team ,
we have 7600 Cisco router .
Gateway7600#sh inventory
NAME: "CISCO7604", DESCR: "Cisco Systems Cisco 7600 4-slot Chassis System"
PID: CISCO7604 , VID: V01, SN: FOX1509G2DK
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: NWG150300S7
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: , SN: NWG150300S7
NAME: "module 1", DESCR: "WS-SUP32-GE-3B 9 ports Supervisor Engine 32 8GE Rev. 4.4"
PID: WS-SUP32-GE-3B , VID: V04, SN: SAD104204GX
NAME: "msfc sub-module of 1", DESCR: "WS-F6K-MSFC2A Cat6k MSFC 2A daughterboard Rev. 3.1"
PID: WS-F6K-MSFC2A , VID: , SN: SAD104004UC
NAME: "switching engine sub-module of 1", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.3"
PID: WS-F6K-PFC3B , VID: V01, SN: SAD104201HK
NAME: "Transceiver Gi1/1", DESCR: "Transceiver 1000BaseSX Gi1/1"
PID: GLC-SX-MMD , VID: A , SN: FNS163810PP
NAME: "Transceiver Gi1/2", DESCR: "Transceiver 1000BaseT Gi1/2"
PID: N/A , VID: 10.0, SN: MTB0010350
NAME: "Transceiver Gi1/3", DESCR: "Transceiver 1000BaseT Gi1/3"
PID: N/A , VID: 10.0, SN: MTB0010347
NAME: "Transceiver Gi1/4", DESCR: "Transceiver 1000BaseSX Gi1/4"
PID: GLC-SX-MMD , VID: A , SN: FNS163810Q5
NAME: "Transceiver Gi1/5", DESCR: "Transceiver 1000BaseT Gi1/5"
PID: N/A , VID: E , SN: 00000MTC125101BJ
NAME: "Transceiver Gi1/6", DESCR: "Transceiver 1000BaseT Gi1/6"
PID: N/A , VID: E , SN: 00000MTC1250051P
NAME: "Transceiver Gi1/7", DESCR: "Transceiver 1000BaseT Gi1/7"
PID: N/A , VID: , SN: MTC1229019U
NAME: "Transceiver Gi1/8", DESCR: "Transceiver 1000BaseT Gi1/8"
PID: N/A , VID: , SN: MTC1229019N
NAME: "module 2", DESCR: "WS-X6148-GE-TX 48 port 10/100/1000mb EtherModule Rev. 1.1"
PID: WS-X6148-GE-TX , VID: , SN: SAL09486K5X
NAME: "FAN-MOD-4HS 1", DESCR: "High Speed Fan Module for CISCO7604 1"
PID: FAN-MOD-4HS , VID: V01, SN: DCH15050161
NAME: "PS 1 PWR-2700-AC/4", DESCR: "2700W AC power supply for CISCO7604 1"
PID: PWR-2700-AC/4 , VID: V02, SN: APS1503002C
NAME: "PS 2 PWR-2700-AC/4", DESCR: "2700W AC power supply for CISCO7604 2"
PID: PWR-2700-AC/4 , VID: V02, SN: APS1503002J
Gateway7600#
Gateway7600#sh mod
Gateway7600#sh modu
Gateway7600#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B SAD16204GX
2 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SA096K5X
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ----- ------------- ------------ -------
1 0018.bad2.2324 to 0018.bad2.2 4.4 12.2(18r)SX 15.2(4) Ok
2 0015.fa5d.b600 to 0015.fa5d.b6 1.1 7.2(1) (sierra_main Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Policy Feature Card 3 WS-F6K-PFC3B SAD1001HK 2.3 Ok
1 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD1044UC 3.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
sh version
Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 20-Jul-12 18:18 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)
Gateway7600 uptime is 2 years, 37 weeks, 2 days, 22 hours, 27 minutes
Uptime for this control processor is 2 years, 37 weeks, 2 days, 22 hours, 0 minutes
System returned to ROM by power-on (SP by error - a Software forced crash, PC 0x405ECBD4)
System image file is "sup-bootdisk:c7600s3223-adventerprisek9-mz.152-4.S.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K bytes of memory.
Processor board ID FOX1509G2DK
R7000 CPU at 300MHz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
2 Virtual Ethernet interfaces
57 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
We inserted the module :
WS-X6708-10GE
But it did not light up with console below :
*Jan 19 2022 22:20:35 GMT+3: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3, power not allowed: The image for the card is not bundled in image.
My question is , is it supported or not supported at all .
if supported , do we need to upgrade the ISO ?
Thanks
01-21-2022 04:23 PM
WS-X6708-10GE is only supported on Sup720.
Reference: WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet Modules
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: