cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
921
Views
0
Helpful
0
Replies
Highlighted
Beginner

Cisco C819G-4G-A-K9 GPS Configuration

I can't seem to get the GPS service to work on our C819G-4G-A-K9.

I can get the unit to display up to 5 Satellites with their respective elevation and aziuth, but SNR is always 0, and the GPS state always lists "GPS acquiring".  

I've tried many different locations and also antenna configurations..

Any suggestions??

System image file is "flash:c800-universalk9-mz.SPA.154-3.M6a.bin"

controller Cellular 0
lte sim data-profile 1 attach-profile 1
lte gps mode standalone
lte gps nmea ip
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 20
lte modem link-recovery wait-timer 10
lte modem link-recovery debounce-count 6
no cdp run

rastrac#sh cell 0 gps

GPS Info
-------------
GPS Feature: enabled
GPS Port Selected: Dedicated GPS port
GPS State: GPS acquiring
GPS Mode Configured: standalone
Latitude: 0 Deg 0 Min 0 Sec North
Longitude: 0 Deg 0 Min 0 Sec East
Timestamp (GMT): Sat Jan 5 19:00:00 1980

Fix type index: 0, Height: 0 m
Satellite Info
----------------
Satellite #9, elevation 0, azimuth 0, SNR 0
rastrac#

0 REPLIES 0