I can't seem to get the GPS service to work on our C819G-4G-A-K9.
I can get the unit to display up to 5 Satellites with their respective elevation and aziuth, but SNR is always 0, and the GPS state always lists "GPS acquiring".
I've tried many different locations and also antenna configurations..
Any suggestions??
System image file is "flash:c800-universalk9-mz.SPA.154-3.M6a.bin"
controller Cellular 0
lte sim data-profile 1 attach-profile 1
lte gps mode standalone
lte gps nmea ip
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 20
lte modem link-recovery wait-timer 10
lte modem link-recovery debounce-count 6
no cdp run
rastrac#sh cell 0 gps
GPS Info
-------------
GPS Feature: enabled
GPS Port Selected: Dedicated GPS port
GPS State: GPS acquiring
GPS Mode Configured: standalone
Latitude: 0 Deg 0 Min 0 Sec North
Longitude: 0 Deg 0 Min 0 Sec East
Timestamp (GMT): Sat Jan 5 19:00:00 1980
Fix type index: 0, Height: 0 m
Satellite Info
----------------
Satellite #9, elevation 0, azimuth 0, SNR 0
rastrac#