cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
243
Views
0
Helpful
11
Replies
Highlighted

Broadworks - no meet-me conference feature

I would like to do a couple of tests from "BroadWorks Services – Meet-Me Conferencing" chapter of SIP Phone Interoperability Test Plan.

 

Test plan says "As group administrator, browse to Meet-Me Conferencing → Meet-Me Conference Bridges".

But unable to do this because there is no link Meet-Me Conferencing on the left pane.

NoMeetMe.png

11 REPLIES 11
Highlighted
Beginner

Re: Broadworks - no meet-me conference feature

Could you provide us the group name ?

Highlighted

Re: Broadworks - no meet-me conference feature

It's SergeyKhim-Grp1

Highlighted
Beginner

Re: Broadworks - no meet-me conference feature

Please check the Meet-me-conference option now. I have enabled the required changes.
Highlighted

Re: Broadworks - no meet-me conference feature

Link MeetMe conferencing appeared on the left pane.

But I cannot create new meet-me conf. bridge.

There is no "Meet-Me Conference Bridges".

If I click on Meet-Me Conferencing ports I see only the information about number of allocated ports.

How can I create new meet-me conference bridge?

new_meetme1.pngnew_meetme2.png

Highlighted
Beginner

Re: Broadworks - no meet-me conference feature

I have assigned the group service, you should be able to configure the meet-me bridge.
Highlighted

Re: Broadworks - no meet-me conference feature

Yes, I can configure it now but there are only 2 ports available (Maximum Ports Available For This Bridge: 2).

According to interoperability test plan we should test with at least 4 ports.

Could you please also add several ports?

Highlighted

Re: Broadworks - no meet-me conference feature

Hi.

Please disregard my last message.

 

My group has been expired on weekend and I have created new one with the same name SergeyKhim-Grp1

 

Could you please do all what you did previously but for my new group and add several ports?

// maximum available ports should be 4 

 

Highlighted
Beginner

Re: Broadworks - no meet-me conference feature

This has been done.
Highlighted

Re: Broadworks - no meet-me conference feature

Thank you.

Highlighted

Re: Broadworks - no meet-me conference feature

I was not able to check due to problem with calls (https://community.cisco.com/t5/cloud-calling/broadworks-call-is-dropped-after-30-seconds/m-p/4066687)

My group was expired again on Saturday and I have created new one with the same name SergeyKhim-Grp1.
Could you please do all what you did previously but for my new group?

Or maybe there is possibility to do it permanently in order to not asking you to do it each time?

Highlighted
Beginner

Re: Broadworks - no meet-me conference feature

Meet-me conferencing has been provisioned to your group.
This widget could not be displayed.