cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
282
Views
0
Helpful
0
Replies
Highlighted
Beginner

Anyconnect confiugration on Cisco ASAv(Azure)

Hi team,

I have deployed an ASAv on Azure.

I have configured NSG on Azure

I have done basics routing and IP configuration on ASAv

I have done Anyconnect configuration on ASAv through ASDM

I have allowed all port HTTP HTTPS on Azure interface and Public IP mapped with ASAv outside interfaces.

but still not getting Anyconnect connection.

below is the screenshot of ASAv configuration:

 

 

ASAvDemoVM(config)# show int IP br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 10.3.2.4 YES CONFIG up up
GigabitEthernet0/1 10.3.1.4 YES CONFIG up up
GigabitEthernet0/2 unassigned YES unset administratively down up
Internal-Data0/0 169.254.1.1 YES unset up up
Management0/0 10.3.0.4 YES DHCP up up

 

 

ASAvDemoVM(config)# show route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, V - VPN
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
SI - Static InterVRF
Gateway of last resort is 10.3.0.1 to network 0.0.0.0

S* 0.0.0.0 0.0.0.0 [1/0] via 10.3.0.1, management
C 10.3.0.0 255.255.255.0 is directly connected, management
L 10.3.0.4 255.255.255.255 is directly connected, management
C 10.3.1.0 255.255.255.0 is directly connected, outside
L 10.3.1.4 255.255.255.255 is directly connected, outside
C 10.3.2.0 255.255.255.0 is directly connected, inside
L 10.3.2.4 255.255.255.255 is directly connected, inside

 

 

ASAvDemoVM(config)# ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/8/10 ms

 

 

please help me with this.

 

 

 

 

 

0 REPLIES 0
Content for Community-Ad