cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1153
Views
0
Helpful
2
Replies
little-fingers
Beginner

[ISR G2 Connector] Redirect non standard port web traffic to the towers

Hello,

 

I fail to see how to tell the ISR to reroute traffic to the Towers when using a non std port in URL like

http://srv.exmaple.com:12345/

or

https://srv.example.com:45681/ .

 

Is there any map I could tweak to get this to work ?

 

Thanks !

2 ACCEPTED SOLUTIONS

Accepted Solutions
Juan Ramos
Cisco Employee

Not the expert on ISR G2 but have you considered Port to Application Mapping (PAM)?

Something like

ip port-map https port tcp 45681

where 45681 is an additional port to consider for HTTPS.

source - http://tinyurl.com/75jyb

View solution in original post

Hello,

Sorry for not having updated this thread before.

You are absolutely right, the IOS Scansafe connector uses PAM.

Thanks

View solution in original post

2 REPLIES 2
Juan Ramos
Cisco Employee

Not the expert on ISR G2 but have you considered Port to Application Mapping (PAM)?

Something like

ip port-map https port tcp 45681

where 45681 is an additional port to consider for HTTPS.

source - http://tinyurl.com/75jyb

View solution in original post

Hello,

Sorry for not having updated this thread before.

You are absolutely right, the IOS Scansafe connector uses PAM.

Thanks

View solution in original post

Content for Community-Ad

This widget could not be displayed.