Nexus N7706 with F3-348XP-23 line card VDC port allocation.
While i have worked with Nexus for some time, i have never had to assign more than 12 ports to one VDC and some of the old cards did not have certain restrictions. I seemed to be getting conflicting information from different documents
On the F3-348XP-23 line card, installed on a N7706
1. Can i assign port p1 to 24 in one VDC and p25 to 40 in a different VDC regardless of the port allocations in the link below which has this diagram.
Setting up some 3rd party devices for my Fire and Rescue trucks that will VPN back to our FPR-2110. I can blatantly see what's going on with the IKEv2 platform and protocol debugs on. It's selecting the wrong dynamic map!IKEv2-PLAT-4: (32): Cry...
On January 22, 2020, the Cisco Product Security Incident Response Team (PSIRT) disclosed a vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC). The vulnerability could allow an unauthenticated, remote attac...
Meet the Authors Event - A Cybersecurity Deep Dive with Omar Santos
(Live event – Thursday, January 23rd, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 23rd, January 2020 at 10hrs PDT
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...