cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
10564
Views
35
Helpful
32
Replies

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Hello Maqsood,

I've configured CUCM and IM&P v9.1 and jabber client 9.2(1), the  chat works fine and also the Cisco Unified Client Services Framework  Device can make and receive calls but if I try to select the desk phone  for calls it just keeps trying to select it but it doesn't work.

Is there and special config besides the normal CUCM and IM&P v9.x integration in order to use the desk phone????

What do you think can be causing this??

Thanks in advance for your help.

Highlighted

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Hi Alfonso,

if you have created the desk phone device following all the steps in "Create Desk Phone Devices", then below are some more steps that you can check:

  • Desk phone is associated to the end user
  • User is part of the Standard CTI Enabled user group profile
  • Desk phone has the option “Allow CTI Control” selected
  • User is connecting to the same CUCM server where the desk phone is registered
  • Desk phone does not belong to the Standard CTI Secure Connection user group, if it does then remove from the group
  • If it is a round table phone (9971, 9951), the option “Standard CTI Allow Control of Phones supporting Connected Xfer and conf” permission is enabled for the user in CUCM

Thanks,

Maqsood

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Hello Maqsood,

I've configured CUCM and IM&P v9.1 and jabber  client 9.2(1), the  chat and the calls work fine but when I try to log  in Phone Accounts -> Voicemail I get an error about the credentials, I  have all integrated with Active Directory and the user and password  that I'm using for voicemail is the same that I use to log in the jabber  client wich worked fine.

Here I attached the error screen.

What do you think can be causing this??

Thanks in advance.

Beginner

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Hi had a similar problem, have you enabled the following in Unity Connection so the two systems can communicate correctly

These are enabled under the Class of Service for the specified users in Unity Connection

Allow Users to Access Voice Mail Using an IMAP Client and/or Single Inbox

Checked

Allow IMAP Users to Access Message Bodies

Selected

Cheers

ChrisB

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hello Chris,

I've verified that and it is configured, what I noticed is that I tried to login to the x.x.x.x/ciscopca (with the Unity's IP) and it  didn't work, I have my cucm integrated with ldap and in  my cuc I  imported the users from the cucm. It seems that the authentication using  the ldap users is broken in the cuc.

What do you think can be causing this??

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Have you tried the synchronize credentials with coicemail service setting in UCM - IM and Presence server?

"To synchronize credentials with the voicemail service, select Unified CM - IM and Presence from the Credentials source for voicemail service drop-down list.

Unified CM - IM and Presence  uses the instant messaging and presence credentials to log in to the  voicemail service. As a result, users do not need to enter their  credentials for voicemail services in the client."

Thanks,

Maqsood

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi Maqsood,

Did that and it is still not showing the voice mails (attached image) and when I click the Option, I didn't see any "Phone Account" option available.

In order to have this feature working the CUC has to be integrated with the LDAP server???

Thanks in advance.

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi Maqsood,

At the end I did the integration CUC - LDAP and it worked!

The  documentation doesn't tell you that the CUC - LDAP integration is a  must in order to have the Voicemail working in the Jabber. (Or I didn't  find it)

Thanks for your help.

Regards

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Dear Alfonso,

you wrote:

"I have my cucm integrated with ldap and in  my cuc I  imported the users from the cucm."

This is probably your problem. Unity should also be intergrated with LDAP and users imported from LDAP (not CUCM).

If you do so then you can check in CUCM: Service Profile Configuration -Voicemail Profile - Credentials source for voicemail service to Unified CM - IM and Pressence.

After this actions Jabber will auto log in VoiceMail and you won't need to enter it manually.

PS, Make sure to fill correctly Phone Number Conversion under LDAP. Extension number have to mach used in CUCM when you do import.

Hope this help.

Cheers,

Lukasz

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi Lukaz,

At the end I did the integration CUC - LDAP and it worked!

The  documentation doesn't tell you that the CUC - LDAP integration is a  must in order to have the Voicemail working in the Jabber. (Or I didn't  find it)

Thanks for your help.

Regards

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi Chris,

At the end I did the integration CUC - LDAP and it worked!

The  documentation doesn't tell you that the CUC - LDAP integration is a  must in order to have the Voicemail working in the Jabber. (Or I didn't  find it)

Thanks for your help.

Regards

Beginner

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Hi Expert,

I'm using the Jabber for Windows 9.2.1. When i click on the Option, i didn't see any "Phone Account" option available.

What could be the reason?

TIA

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi,

Same thing happened to me.

Any ideas???

Ask the Expert: Jabber for Windows 9.2 - Configuration and Feat

Phone Account tab is not visible when when the voicemail credentials are synched with presence credentials.

Thanks,

Maqsood

Re: Ask the Expert: Jabber for Windows 9.2 - Configuration and

Hi Orochi,

At the end I did the integration CUC - LDAP and it worked!

The  documentation doesn't tell you that the CUC - LDAP integration is a  must in order to have the Voicemail working in the Jabber. (Or I didn't  find it)

Regards

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards