05-31-2013 12:32 PM - edited 03-17-2019 03:17 PM
With Maqsood Mushtaq
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn how to install, configure, and troubleshoot Cisco Jabber for Windows 9.2 with Cisco engineer Maqsood Mushtaq. With Cisco Jabber for Windows 9.2, you can now define multiple comma-separated values to filter search queries, use different product modes, and set up secure audio and video traffic. In this session, you’ll learn what requirements are necessary in order to set up the client properly and new features in this release.
Maqsood Mushtaq is a software engineer at Cisco in the Clients and Mobility Business Unit in Galway. He has provided support/bug fixes for Cisco Unified Personal Communicator (UPC) 8.x and Cisco Unified Communications Integration for Microsoft Office Communicator/Lync. Currently he supports Cisco Jabber for Windows. This includes setup, configuration, tracking customer feedback, and maintenance releases. He has over three and a half years of experience in working with Cisco Unified Communications applications, including work as a developer on visual voicemail for Cisco IP phones, Cisco Phone Designer, and Cisco UPC 8.x. He also has worked with Java MIDlets, C#, .NET, Windows Presentation Foundation, and InstallShield.
Remember to use the rating system to let Maqsood know if you have received an adequate response.
Maqsood might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community discussion forum shortly after the event. This event lasts through June 14, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
06-10-2013 09:17 PM
Hello Maqsood,
I've configured CUCM and IM&P v9.1 and jabber client 9.2(1), the chat works fine and also the Cisco Unified Client Services Framework Device can make and receive calls but if I try to select the desk phone for calls it just keeps trying to select it but it doesn't work.
Is there and special config besides the normal CUCM and IM&P v9.x integration in order to use the desk phone????
What do you think can be causing this??
Thanks in advance for your help.
06-11-2013 04:12 PM
Hi Alfonso,
if you have created the desk phone device following all the steps in "Create Desk Phone Devices", then below are some more steps that you can check:
Thanks,
Maqsood
06-10-2013 09:51 PM
Hello Maqsood,
I've configured CUCM and IM&P v9.1 and jabber client 9.2(1), the chat and the calls work fine but when I try to log in Phone Accounts -> Voicemail I get an error about the credentials, I have all integrated with Active Directory and the user and password that I'm using for voicemail is the same that I use to log in the jabber client wich worked fine.
Here I attached the error screen.
What do you think can be causing this??
Thanks in advance.
06-10-2013 10:03 PM
Hi had a similar problem, have you enabled the following in Unity Connection so the two systems can communicate correctly
These are enabled under the Class of Service for the specified users in Unity Connection
Allow Users to Access Voice Mail Using an IMAP Client and/or Single Inbox | Checked |
Allow IMAP Users to Access Message Bodies | Selected |
Cheers
ChrisB
06-11-2013 11:58 AM
Hello Chris,
I've verified that and it is configured, what I noticed is that I tried to login to the x.x.x.x/ciscopca (with the Unity's IP) and it didn't work, I have my cucm integrated with ldap and in my cuc I imported the users from the cucm. It seems that the authentication using the ldap users is broken in the cuc.
What do you think can be causing this??
06-11-2013 04:24 PM
Have you tried the synchronize credentials with coicemail service setting in UCM - IM and Presence server?
"To synchronize credentials with the voicemail service, select Unified CM - IM and Presence from the Credentials source for voicemail service drop-down list.
Unified CM - IM and Presence uses the instant messaging and presence credentials to log in to the voicemail service. As a result, users do not need to enter their credentials for voicemail services in the client."
Thanks,
Maqsood
06-12-2013 10:14 PM
Hi Maqsood,
Did that and it is still not showing the voice mails (attached image) and when I click the Option, I didn't see any "Phone Account" option available.
In order to have this feature working the CUC has to be integrated with the LDAP server???
Thanks in advance.
06-13-2013 09:06 AM
Hi Maqsood,
At the end I did the integration CUC - LDAP and it worked!
The documentation doesn't tell you that the CUC - LDAP integration is a must in order to have the Voicemail working in the Jabber. (Or I didn't find it)
Thanks for your help.
Regards
06-12-2013 03:14 AM
Dear Alfonso,
you wrote:
"I have my cucm integrated with ldap and in my cuc I imported the users from the cucm."
This is probably your problem. Unity should also be intergrated with LDAP and users imported from LDAP (not CUCM).
If you do so then you can check in CUCM: Service Profile Configuration -Voicemail Profile - Credentials source for voicemail service to Unified CM - IM and Pressence.
After this actions Jabber will auto log in VoiceMail and you won't need to enter it manually.
PS, Make sure to fill correctly Phone Number Conversion under LDAP. Extension number have to mach used in CUCM when you do import.
Hope this help.
Cheers,
Lukasz
06-13-2013 09:06 AM
Hi Lukaz,
At the end I did the integration CUC - LDAP and it worked!
The documentation doesn't tell you that the CUC - LDAP integration is a must in order to have the Voicemail working in the Jabber. (Or I didn't find it)
Thanks for your help.
Regards
06-13-2013 09:07 AM
Hi Chris,
At the end I did the integration CUC - LDAP and it worked!
The documentation doesn't tell you that the CUC - LDAP integration is a must in order to have the Voicemail working in the Jabber. (Or I didn't find it)
Thanks for your help.
Regards
06-12-2013 09:40 PM
Hi Expert,
I'm using the Jabber for Windows 9.2.1. When i click on the Option, i didn't see any "Phone Account" option available.
What could be the reason?
TIA
06-12-2013 10:09 PM
Hi,
Same thing happened to me.
Any ideas???
06-13-2013 04:06 PM
Phone Account tab is not visible when when the voicemail credentials are synched with presence credentials.
Thanks,
Maqsood
06-13-2013 09:07 AM
Hi Orochi,
At the end I did the integration CUC - LDAP and it worked!
The documentation doesn't tell you that the CUC - LDAP integration is a must in order to have the Voicemail working in the Jabber. (Or I didn't find it)
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide