01-06-2014 01:54 AM - edited 03-17-2019 03:51 PM
Hi,
I wanted to know how I have to configure the jabber-config.xml and/or the installer .msi to automatically set the Jabber mode to "deskphone" after the user logs in the first time. All our users have a deskphone configured so I can manually change to deskphone mode after login.
We are running Cisco Jabber For Windows 9.6 and CUCM 9.1 with IM & Presence 9.1.
In the jabber-config.xml is the following line:
<InitialPhoneSelection>deskphone</InitialPhoneSelection>
But that does not work. Is there something else to configure to make this work?
Thanks!
Tobias Blachetta
01-13-2014 01:22 AM
Does nobody know how the "IntitialPhoneSelection" works? Any hint maybe?
01-13-2014 05:34 AM
There is a bug for this: CSCua58112
According to https://supportforums.cisco.com/thread/2175043 , that functionality is slated for Jabber for Windows 10.
Gareth
01-20-2014 05:03 AM
I'm looking to deploy Jabber 9.6 client to windows 7 computers via SCCM.
I'm trying to use the msi commands/switches to make sure it defaults to " IM & Presence " and set to a default server when the user first launches the client but have been unable to do so with 9.6 client. The client always opens up with the "automatic" mode selected.
Can you anyone provide the correct msi switches or workaround?
thanks,
01-20-2014 10:50 AM
Have you tried the switches as shown here http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_2/JABW_BK_C9731738_00_jabber-windows-install-config_chapter_0100.html#JABW_TK_UE4FB9DD_00
01-20-2014 10:20 PM
That link goes to the 9.2.x Guide, but the switches have changed from 9.2.x to 9.6.
01-21-2014 04:19 AM
Thanks for the suggestions but would know the exact swtich that would set the jabber client to startup with " IM & Presence " selected and a specified default server? I have tried several switches and nothing seems to work. When jabber opens for the first time it defaults to the entry asking for an email address and the continue button. If I enter a fake email address and click on Continue, I then get the option to manually setup the configuration but that configuration alwasy defaults to Automatic.
Let me know if you can help. thanks.
01-21-2014 04:34 AM
My Jabber 9.6 Client starts with username and password mask.
I dont know if a jabber-config.xml is required, but we have the following configured in it:
And the Jabber install.msi is configured with these parameters:
AUTHENTICATOR CUP
CUP_ADDRESS cucmpublisher.domain.com
CLEAR 1
CTI cucmpublisher.domain.com
SERVICES_DOMAIN domain.com
VOIP_SERVICES_DOMAIN domain.com
LOGIN_RESOURCE MUT
TFTP cucmpublisher.domain.com
If you configure the client like this, the server is set as automatic, but it uses your CUCM server address and you can directly login with username and password after installation.
Hope that helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide