Collaboration Applications

Hi everyone,We have a customer running CUCM 8.6 and Presence 8.6, and an ASA with Anyconnect enabled.They can connect to the VPN and connect to the Jabber client, but when making a call (whether external or internal) it connects, but without any voic...

Our remote users are using jabber 9.1.3 and Cisco anyconnect, however most are unable to search for other users on their windows machines (win 7 pro) but can search on their iPhone or android. What is the conflict?Sent from Cisco Technical Support iP...

hi everybody,we have a CUCM, CUC and CUP in version 8.6, configure Cisco Jabber for windows with voice mail all is working only the voicemail notifier (mwi) not work, we change in CUC Class of Service (Voice Mail User COS) and check Allow Users to Ac...

Hi all,I understand that Cisco recommends using Jabber outside the corporate network via AnyConnect, but if we chose not to deploy AnyConnect, and the ASA has the UC proxy license, is it still able to use Jabber outside the LAN? I tested cannot...not...

Hi everyone,I've got some trouble to use jabber for windows (9.1.3) on a CUCM9.1 (bundled into a BE6K).I have used Cisco Jabber for Windows 9.1.x Server Setup Guide, and when I log jabber, here is the results when I make a connection test:I only want...

Has anyone one worked with Jabber server software version 9.0/9.1?  I am unable to find the SKU for this version - I have used JABBER-ADDON but this is for 8.6 version.    Thanks!              

                   Hi ,                         Is Iphone can be registered to CME 8.0  remotely ,if yes what is the best way ? or any other solution.From,Shib

Hello,we have bought a CUWL Pro licensing for a customer (to have CUCM, CUC, CUP, ...).Among the other things, we have received a license (MP-85-UWL-PAK - MeetingPlace 8.5 PAK for CUWL) and a media kit (Cisco Unified MeetingPlace 8.5(2) - Application...

Hello, I'm currently configuring a Jabber POC.CUPS 8.6.4CUCM 8.6.2Jabber for WIndows, MAC, iPhone, iPad and Android.LDAP sync & auth enabled on call manager.User id is not mapped on sAmAccountname in the active directory but on employee number.I was ...

Hi GuysI have a issue using Jabber for Win. I´m triying to jabber client and this say incorrect user and password. I check the user by ccmuser web page. The CUCM version is 8.6.2.20000-2. The CUP ver is 8.6.4.10000-28. The telephone have the same CFS...

Hi,When calling some 800 numbers, such as 800-426-7378, the keypad is grayed out in Jabber for Windows. We tried different versions of jabber and this happens when call goes out SIP trunk as well as a PRI T1 PSTN connection. A client reported this pr...

Hi,i´m trying to configure Jabber for Windows 9.1.3 and CUCM 9.1.1a for extend and connect.I have done this before in a Lab at CiscoLive.So i think i have done all steps.When i configure the E&C number in the CTI remote device, the remote destination...

Today i was doing some testing and noticed voice and video quality was good until i started sharing a presentation.  When sharing the presentation  the video would freeze up.  I have the bandwidth set on 2meg.  This is going across our wired lan infr...

Hi AllAny one have any advice on Connect on Demand.Appears the iPad APP is not pointing to the AnyConnect APP.-  Jabber for iPad works fine over AnyConenct if I first book up the AnyConnect APP-  VPN URL has been added to Jabber for iPad config in UC...