cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5274
Views
80
Helpful
38
Replies

Business Edition 6k upcoming Rls

Raaze26
Level 1
Level 1

After Prime Collaboration gone EOS, how many applications are available for C220M?

Expressway-c and Expressway-E are included or are available as a separate .ova format?

Any consolidated implementation and configurational document for BE6k along with ISR 4XXX routers and Expressway -C and expressway-E?

How can we design BE6K + ISR 4xxx + Expressway-c & E within a same building but different data centers as fully HA format?any relevant CVD?

 

 

38 Replies 38

Nithin,

 

please help me to read out this option in BOQ.

"Cisco Touch10 controller for collaboration end points"

"Cisco Meeting Server"

further is webexMeeting required for MX800 and jabber or not compulsory in presence of BE6k+ Expressways? Or webex meeting is a separate individual application for Video con...

 

"Cisco Touch10 controller for collaboration end points"

data_sheet_c78-646041_0.png

 

Cisco meeting server is the conference resource 

you can learn more from below link.

 

https://www.cisco.com/c/en/us/products/conferencing/meeting-server/index.html#~features

Cisco Meeting Server brings premises-based video, audio, and web communication together to meet the collaboration needs of the modern workplace. It works with third-party devices, and provides an enjoyable and intuitive user experience. It also scales easily, and can be purchased using our all-in-one, user-based multiparty licensing offer.

 

 

Regarding MX800 registration supported call control. it can be on Prem call control or Webex Cloud.

The systems now support cloud registration to Cisco Webex for even faster and more cost effective deployment2.

Go through below data sheet.

https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-mx-series/datasheet-c78-731263.html

 

Screen Shot 2020-08-11 at 7.05.26 PM.png



Response Signature


Hi Nithin, 

 

Hope you are fine.

 

what does it means in my BOQ list along with BE6K + MX800.

 

" choose of VCS or for CUCM version 11.x TP-Room License."

 

 

choose of VCS or for CUCM version 11.x TP-Room License means,  you can register MX 800(I believe u are using MX as VC end Point) on CUCM and TP room license will be utilized by CUCM or on expressway C server using LIC-EXP-ROOM license.

 

when you purchase TP-Room license you also get LIC-EXP-ROOM which is free. If you need to register MX-800 on VCS you can use LIC-EXP-ROOM license on expressway C. 



Response Signature


Nithin,

 

what is the role of " RMS licensing included with PMP & SMP"

RMS:- Rich Media Session license.

Rich Media Sessions 

If your system has a rich media session key installed and thus supports business-to-business calls, and interworked or gatewayed calls to third-party solutions and so on.

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/expressway/config_guide/X12-6/exwy_b_mra-expressway-deployment-guide/exwy_b_mra-expressway-deployment-guide_chapter_01101.html

 

https://www.cisco.com/c/en/us/support/docs/unified-communications/expressway/214621-understand-expressway-and-vcs-license-in.html

Screen Shot 2020-08-12 at 11.45.05 AM.png



Response Signature


Nithin,

 

In new implementation mode, using BE6k

are we need to create SIP trunk and Sip profile in between each component?

i.e CUCM+ IM&P+ Unity Connection + Unified Attendant Console advance + Expressway C & E + Prime Collaboration

Second, License will be deployed in BE6K Pub and as well as BE6K Sub both or only BE6k Pub.

in case of Primary (Pub) failure how will be licenses will entertained?

HI Nithin,

 

can we use  BE6k to deploy Meeting Server or should use separate instance?

Capture.JPG

The below link will give you more informations.

Virtualization for Cisco Meeting Server

 

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-meeting-server.htmlScreen Shot 2020-08-12 at 3.32.46 PM.png



Response Signature


The maximum call supported depend  on the platform. so u should check your requirement and chose the right platform.  The below link will give you more informations.

Virtualization for Cisco Meeting Server

 

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-meeting-server.htmlScreen Shot 2020-08-12 at 3.32.46 PM.png



Response Signature


Nithin,

 

 

what is the differnce in between these two products? Is there only number of ports difference and Both will be used for voice E1?

 

"2 Port Multiflex Trunk Voice/Channelized Data T1/E1 Module" Vs "4 Port Multiflex Trunk Voice/Clear-Channel Data T1/E1 Module".

 

Both cards support Voice.

 

In addition to the basic T1/E1 data support, the CE1T1 versions also support structured G.703 with G.704 framing and unstructured E1 (G.703) applications.

 

https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/qa_c67-728823.html

 

Screen Shot 2020-08-12 at 4.24.03 PM.png

 

 

Screen Shot 2020-08-12 at 4.24.14 PM.png



Response Signature


Hi Nithin,

 

Hope you are fine.

I am looking a technical solution regarding ISDN/PRI-E1 configuration. i have two ISR -4431 on different locations. i am going to terminate 2x E1s on each router. but i want to segregate the out going calls as first call go out from 1st router's E1 and 2nd call should go out form 2nd router's E1. So for this purpose do you have any document or cvd which can help me out or any pre-configured document. please share.

Note: access code want to be remain same as "9" for all users.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: