Cisco Expressway Compatibility with CUCM

[scr.sybex1]

Dear

is there any compatibility guide between cucm and expressway version.

I want to know if i can run expressway 14 with cucm 8.6.

I appreciate if there is a document that i can use for checking compatilibity.

[Roger Kallberg]

You won’t find your version of CM in the compatibility matrix as it’s long past EOL. But in the current matrix there is a note about what version to use for CM versions before 11.5(1)SU6.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html
Based on that I think that you should possibly not use X14 with your version of CM.

[Nithin Eluvathingal]

For compatibility Refer Cisco Collaboration Systems Release Compatibility Matrix from below link.But you wont find any thing for 8.6 as this version got EOL 2017.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

Expressway 14 and CUCM  8.6 is not  recommend.