Cisco Jabber 12.7

[Daniov1]

Hi ,

I need to configure Cisco Jabber client with the following configuration (automatically setting up):

- Menu-> View -> Show label (Checked)
- Menu-> Setting -> Appearance -> High Contrast.
- Menu ->Setting -> Status -> Show me as [Away] If not Active -> "5"(change value)

I tried to search some information of Jabbr-config.xml with no success.
Is there an option to configure it?

[Jaime Valencia]

Only the last one is configurable via the .xml

[Daniov1]

What is the parameter for this ?

[Mark Swanson]

Here's the parameters reference guide for Cisco Jabber 12.7;

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_7/cjab_b_parameter-reference-guide-jabber-127.html

If you're running CUCM and CUP 12.x, then you can declare most of the 'jabber-config.xml' parameters under the UC Service Profile to include some settings (parameters) you requested.

[Daniov1]

I have CUCM version 10.5 .
I know this document and i didn't find this parameter.
What is the parameter?

[Mark Swanson]

They are;

<ShowTabLabel>true</ShowTabLabel>

<Set_Status_Inactive_Timeout>10</Set_Status_Inactive_Timeout>

But there's no parameter for high contrast, as far as I can tell.

I assume you can configure both of these parameters through the xml file, otherwise, why would they be there?

And I should mention, both of these parameters can be configured under the UC Service within CUCM v12.x

-Mark