Hello,
I want to use Cisco Jabber 8.6.2 with Call manager Express 8.6
I configured the IPhone on CME and is working ok on local wireless LAN,
When I’m using the VPN I can place call's inside the network but I can't use on outside line. I have no sound.
Also if I place a call and the I end the call, the called phone rings and is not stopping. So I think is a call disconnect problem.
Bellow is a part of the configuration.
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
call start slow
sip
session transport tcp
registrar server
!
voice class codec 1
codec preference 1 g729r8
!
voice class custom-cptone romania
dualtone busy
frequency 450
cadence 170 170
dualtone disconnect
frequency 450
cadence 170 170
!
!
voice register global
mode cme
source-address 10.12.4.252 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000545624458818
!
voice register dn 1
number 5146
call-forward b2bua all 5108
call-forward b2bua busy 5160
call-forward b2bua noan 5160 timeout 18
name Ioan Stanciu
shared-line
label Ioan
!
voice register pool 10
registration-timer max 720 min 660
id mac 68A8.6D91.3FE0
session-transport tcp
type CiscoMobile-iOS
number 1 dn 1
username 5146 password 5146
!
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone romania
no battery-reversal
timeouts call-disconnect 2
timeouts wait-release 2
connection plar opx immediate 5150
caller-id enable
!
voice-port 0/0/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone romania
no battery-reversal
timeouts call-disconnect 2
timeouts wait-release 2
connection plar opx immediate 5150
caller-id enable
!
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
codec g722-64
maximum sessions 1
associate application SCCP
!
dial-peer voice 2 pots
preference 2
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/1
!
telephony-service
video
maximum bit-rate 256
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 25
max-dn 120
ip source-address 10.12.4.252 port 2000
max-redirect 7
auto assign 1 to 8
service phone videoCapability 1
service phone paramEdibility 1
no service directed-pickup
timeouts interdigit 6
timeouts ringing 15
Any idea what can be the problem ?
