CISCO Jabber and CME 8.6

[gossa1973]

Is it possible to connect CISCO Jabber to CME 8.6

10x in advanced

[Prashanthi Velpula]

Hello

Hoping you are doing well.

Firstly thank you fo contacting Cisco Support Community. Below is a brief sumamry on the query:

The Cisco Jabber for Android is designed in order to work with Cisco Call manager and Cisco Unity Connection.

CIsco Jabber for Andoid includes following limitations and restrictions. Below is the resource link:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cumc/cisco_jabber/Android/86/Cisco_Jabber_Android_8.6.x_Admin_Guide.html#wp808617

As per the above link:

Telephone integration with call manager versions 6.1.5, 7.1.5, 8.0.3, 8.5, and 8.6 ONLY

Hope the above was informative. Please let me know if you have any further queries and we will be more than happy in assisting further on the same.

Thanks and Regards

Prashanthi Velpula

[mrmhar1408]

CME is supported for Cisco Jabber

voice service voip

ip address trusted list

  ipv4 192.168.50.5 255.255.255.255

allow-connections sip to sip

sip

  bind control source-interface GigabitEthernet0/1

  bind media source-interface GigabitEthernet0/1

  registrar server

voice register global

mode cme

source-address 192.168.9.5 port 5060

max-dn 8

max-pool 8

authenticate register

authenticate realm firewallcx

tftp-path flash:

file text

create profile sync 0033775744721428

voice register dn  5

number 778

name Chris-Android 778

label Chris-Android 778

!

voice register pool  1

registration-timer max 720 min 660

id mac 147D.C5AF.79B2

session-transport tcp

type Jabber-Android

number 1 dn 5

username chris password firewallcx

codec g729r8

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-voice/907-cisco-voice-jabber-android-iphone.html