Cisco Meeting Server - deployment with 2 cms1000

[marco_81]

Hi all,

my customer comes with two CMS1000 servers, these two servers where delivered with pre-installed virtual CMS on board, so one virtual cms app for each hardware.

In this scenario i want one CMS acting as callbridge+db, the other CMS with callbridge only, considering i do not have a third hardware to employ a db instance (to accomplish clustering of 3 db), do you think the deployment:

- two callbridges in cluster

plus

- one db is the right choice?

But if i loose the server with callbridge+db on board, no spaces can be dialed.

Any suggestion about this deployment?

thanks in advance.

[Ayodeji Okanlawon · Accepted solution]

This is not a supported deployment. For a scalable and resilient solution you need 3 db cluster..

Here is a good thread that discussed this in detail..

https://community.cisco.com/t5/telepresence-and-video/cms-clustering-question/td-p/3185136/page/2

And refer to this link for your scalable and resilient deployment.

https://www.cisco.com/c/en/us/support/conferencing/meeting-server/products-installation-and-configuration-guides-list.html

..

Also see attached for a guide on a scalable and resilient setup