Hi guys,
I have a problem with Cisco Mobile 8.0 connected to CUCM 8.6. First off, all CUCM PSTN routing is implemented via National Numbering Plan file and works fine for SCCP devices. However, every time I type some number and hit "Dial" from Cisco Mobile for Iphone client there is a noticeable delay which, I think, is an interdigit timeout. Calls get through very fast if a pound (#) sign is appended.
There are no any application/sip dial rules configured. Those don't allow adding anything to the END of numbers. Besides, I hope I'm not expected to re-implement the national plan for jabber by hand.
I think this behavior is not correct. As long as CUCM receives the whole dialed string, it should process it by usual call routing rules.
Anyone experienced this issue before?
Cheers.
