CME 9.0 Jabber Android

[Ivan Salazar]

Hello

this is a example of configuration on the CME 9.0 , for use Jabber for Android

!

voice register global

mode cme

source-address 10.1.1.1 port 5060

max-dn 8

max-pool 8

authenticate presence

authenticate register

authenticate realm cisco.com

tftp-path flash:

file text

create profile sync 0009082271491447

!

voice register dn  1

number 500 <------Extension number

label Android 500

!

voice register pool  1

registration-timer max 720 min 660

id mac 90C1.156B.460A  <------Mac of wifi android

session-transport tcp

type Jabber-Android

number 1 dn 1

presence call-list

dtmf-relay rtp-nte

username ivan password cisco123

codec g711ulaw

Now, in jabber client , in ID type, " SEP+ phone MAC"   example:  SEP90C1.156B.460A and Server IP: " your IP TFTP server" example: 10.1.1.1

and it should  work

[michaelngai]

Thanks for taking the time to document this.  Any pointers as to where troubleshooting can begin if it doesn't work?

My Jabber-Android client connects, gets an extension and then immediately disconnects itself at first go.  Any subsequent attempts at registering fails.  Would appreciate some initial debug commands I could run to get my troubleshooting process started?

[Jorge Armijo]

On firewall.cx, they have an ES apk for android, I tried and worked like a charm:

http://www.firewall.cx/downloads/cat_view/167-cisco-tools-a-applications.html

You may want to give it a try.

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

[michaelngai]

Thanks for the link Jorge.  I tried it and it was no good either. 

I did try configuring CME from scratch and now it's sort of half working.  Jabber would connect / register, but if I close Jabber and reconnect I must choose "exit" from the application itself AND remove it from the recent apps list in Android otherwise it'll refuse to register.  It's good enough for now I guess.

Hopefully, official support will be here with 10.1