cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
207
Views
0
Helpful
5
Replies
Beginner

CMS LDAP integration

I am facing issue with CMS integration with LDAP. I tried from Postman and from the CMS GUI.. it seems that the active directory service account is working, but there is something wrong with filters or the mapping.... any advice would be highly appreciated.LDAP.PNG

Everyone's tags (1)
5 REPLIES 5
Highlighted
Cisco Employee

Re: CMS LDAP integration

Hi,

What all information you POST on CMS, have you used any mapping? moreover i think it could be some typo error.

Please follow :https://kb.acano.com/content/21/275/en/why-does-my-ldap-sync-fail-with-has-blank-mapped-jid-__-abandoning-sync.html

also : https://cmslab.ciscolive.com/pod4/API/ldap

Regards
Tarun

Highlighted
Beginner

Re: CMS LDAP integration

Hi Tgaur

 

i have accessed these links earlier, but no luck

Highlighted
Cisco Employee

Re: CMS LDAP integration

hi,

the purpose of sending the links was to tell that the issue is with the config you used to integrate the LDAP, please check it. if you think everything is good send the following :

get https://XXX/xx/xx/ldapservers
get https://XXX/xx/xx/ldapmappings
get https://XXX/xx/xx/ldapSources

Regards
Tarun
Highlighted
Beginner

Re: CMS LDAP integration

Hi...

 

Sorry for the late reply... please find the attached screenshots for the ldap config on Postman

Highlighted
Participant

Re: CMS LDAP integration

Hello,

 

The filter you have applied in ldapsources is wrong.

It should be the folder path from where you are syncing the users.for example" "memberof=CN=CMS,CN=users,DC=example,DC=com ""

 

Else mapping looks fine to me.

 

Thanks

Please rate if it is helpful and mark as accepted solution if applicable...

Thanks
Please rate if it is helpful and mark as accepted solution if applicable....
CreatePlease to create content