cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
12269
Views
94
Helpful
68
Replies
Highlighted
Beginner

In answer...1)YES2)NO3)YES4

In answer...

1)YES

2)NO

3)YES

4)checked by default

5) if checked by defualt admin setting NOT neccessary BUT would be nice

6)NO

 

Highlighted

mconguis,Have there been any

mconguis,

Have there been any updates on timing for when we might expect this behavior to be available?

Thank you!

Highlighted
Cisco Employee

Hi Andrew, Committed for

Hi Andrew,

 

Committed for release 10.5 coming summer 2014.

 

Mark

Highlighted
Beginner

What cucm versions will be

What cucm versions will be required for this and have you guys fixed IM notification options? i.e. allowing something other then a blinking/bouncing icon (mac) which is a lot easier to see then a blinking icon as most of my users have their speakers off. Thanks!
Highlighted
Beginner

Hey andrew,I made a switch

Hey andrew,

I made a switch from jabber to the Cisco unified IP communicator version 8, which has a smaller conversion window, with many other options that Jabber doesn't have and it work great for me(IM, Presence, calls...)

Regards

Highlighted
Beginner

New release, version 9.7

New release, version 9.7 build 18474, but still have the popup issue.
Cisco what is the status?

Yes, if the User has selected an option to disable the pop-up on a new call allert.
Yes, if the User has selected an option to disable the pop-up on Accept.
Yes.
Unchecked. Give Users a chance to see how it works, then disable if they don't like it.
Yes, 
No, should be an option for the User.

Highlighted
Beginner

Hey Cisco, the Webex event

Hey Cisco, the Webex event was several months ago any word on the updated Cisco Jabber client without the popup??

i told my users it was coming, after that event, and here it is the end of July and we are still waiting??

 

Fred

Highlighted
Beginner

When  in CTI (desk phone)

  1. When  in CTI (desk phone) control mode and I make or answer a call from my  desk phone Jabber SHOULD NOT bring the conversation window to the front  of all other open applications? Yes/Agree.  Absolutely YES.  This is so incredibly annoying and counter-productive to me.  Please add this option ASAP!  Also, don't re-size the Jabber window, this is also a annoying and counter-productive.  I guess you do that to accomodate video calls, but don't do it for voice calls.
  2. When in CTI (desk  phone) control mode and I initiate a call from within Jabber on my  computer or click "Accept" on the Jabber call toast window on my  computer the conversation window SHOULD come to the front of all other  open applications, yes or no?  Not sure, but make this a user selectable option.
  3. Should there be a user option to "Never bring conversation window to the front when in desk phone control mode"?  Yes
  4. If this is a user option, should that user option be checked or unchecked by default?  Checked
  5. Should this option (also) be an admin setting, yes or no?  Not sure what you  mean.  Admin can override user setting?  No.
  6. When  in CTI (desk phone) control mode and using desk phone video, the  conversation window SHOULD ALWAYS come to the front of all other open  applications regardless of any user setting?  No.  Make this a user option, perhaps default to yes because it is video.

 

Highlighted
Beginner

Any new Information about

Any new Information about this?? The Initial post was written 2 years ago and at the Version 10.6.1 there is still no option to disable the popup window...

 

Falko