cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

7015
Views
20
Helpful
30
Replies
Beginner

CUCM and TEAMS

Dear all,

We wants to use Windows Teams on cloud and CUCM on premise. How can we integrate it?

Thanks in advance

30 REPLIES 30
VIP Collaborator

Re: CUCM and TEAMS

Hi there

 

I don't think there is a readily available integration document for Cisco UC and MS Teams. The ability to deliver fully call-enabled Microsoft Teams clients in coordination with Cisco services is enabled by the Microsoft Direct Routing capability and corresponding Session Border Controller (SBC). This allows the Microsoft Teams clients to utilize the Cisco UC estate for communications with devices as well as PSTN connectivity.

 

Unfortunately, you have dig into more details on how to set up these.

Some good info for you

https://techcommunity.microsoft.com/t5/Microsoft-Teams-Blog/Direct-Routing-enables-new-enterprise-voice-options-in-Microsoft/ba-p/170450

 

https://techcommunity.microsoft.com/t5/Microsoft-Teams-Blog/Direct-Routing-is-now-Generally-Available/ba-p/210359

 

https://docs.microsoft.com/en-us/microsoftteams/direct-routing-plan

 

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

 

 

 

 

Beginner

Re: CUCM and TEAMS

Hello, 

 

I need to intregate Microsoft teams to Cisco on-premise. There is any way to make it?

 

Thank you.

 

Regards,

 

Beginner

Re: CUCM and TEAMS

Sure.

Please get a Ribbon SBC.

Program it for SIP and connect your Call manager and Teams for direct routing.

You will need E3 + conferencing + phone licenses if you want to use teams client to make phone calls.

Beginner

Re: CUCM and TEAMS

Easy - you need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

Beginner

Re: CUCM and TEAMS

Easy - real easy

You need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

Beginner

Re: CUCM and TEAMS

We have used an SBC and connected it successfully for our production environment.

Now all our iphones and desktops can make calls using Teams or Jabber.

it was tricky for our CCIE voice engineer with Microsoft expertise.

But it was done.

Let us know.

Highlighted
Beginner

Re: CUCM and TEAMS

Hey, I am looking for a general guide to hook CUCM to TEAMS server.  Is it as easy as creating a SIP trunk to TEAMS ?

 

 

Beginner

Re: CUCM and TEAMS

Hi there, did you get an answer on this, we too are looking at this as a solution

 

Beginner

Re: CUCM and TEAMS

Use an SBC, Session Border Controller from Ribbon

Read the manual.

Program the Ribbon SBC to take the SIP trunk.

Get the online manuals for Teams.

 

Works really well.

I am sure you will be able to do it.

good luck.

Contributor

Re: CUCM and TEAMS

On the Teams side I'm assuming the E5 license is required correct?
Thankss,
Paul.
Beginner

Re: CUCM and TEAMS

Is your team do consulting we need the similar solution 


@aguha wrote:

We have used an SBC and connected it successfully for our production environment.

Now all our iphones and desktops can make calls using Teams or Jabber.

it was tricky for our CCIE voice engineer with Microsoft expertise.

But it was done.

Let us know.


 

Beginner

Re: CUCM and TEAMS

Yes
Please email aguha@dccil.com

Beginner

Re: CUCM and TEAMS

We can help you to get it working

Six three zero

Six nine two

Two seven zero five

Beginner

Re: CUCM and TEAMS

 

Easy - you need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here