CUE AA

Mohammed18319 · ‎10-08-2020

i am a fresh CUE installed on a ISM module installed on Cisco2921 CME router.

we need to configure AA for incoming calls.

i am using a simple AA script. 6000 is the calledin number configured on CUE for AA application.

dial-peer voice 6000 voip

destination-pattern 6000
session protocol sipv2
session target ipv4:192.168.10.250
dtmf-relay sip-notify
codec g711ulaw
no vad

voice-port 0/0/0
connection plar-opx 6000

but the problem is when no incoming calls is been routed.

even if i dial 6000 from a local phone the autoattendent is not answering and its giving a busy tone.

one CUE if i change the number of session to 2 its showing there are no enough license.

i think there problem is related to port license.

please advise

Nithin Eluvathingal · ‎10-08-2020

Hope you are using demo license, try not to use voicemail and AA together if you have license shortage. Go Through below link for

.

Mohammed18319 · ‎10-10-2020

we are only using the AA application. Voicemail is not currently configured and is not operational.

when i change the port license setting the system gives an alert that license is not enough even if i change the # of ports to 1 only.

i am not sure what license is required and whats the part number to order.

due to 0 port license the AA is not working as per my finding.

Nithin Eluvathingal · ‎10-10-2020

What version you using?

Mohammed18319 · ‎10-10-2020

8.6.5