Hi everyone,
I've been reading the existing posts regarding this issue, but i'm still not having much success in getting the deskphone to be controlled by Jabber. This is for a non-ldap environment, with CUCM 9.1.2, CIMP 9.1.1 and Jabber v11.0.1. I don't want the soft phone capability enabled, just IM and deskphone control. Below is the check list I've put together from my readings.
CUCM Services Check list
1) Cisco CTI Manager Service is activated
Cisco Unified Serviceability >> Tools >> Service Activation
User Check list
1) The phone is associated under the End User
End User config page >> controlled devices >> user's phone's mac address listed
Registered phone is 7960 SCCP
2) The End User has permissions
Groups
Standard CCM End Users
Standard CTI Enabled
'Standard CTI Allow Control of All Devices' needed?
Roles
Standard CCM End Users
Standard CCMUser Admin
Standard CTI Enabled
3) The correct UC Service Profile is assigned
Service Profile: IM&P and CTI (TCP/2748)
4) User has checked Allow Control of Device from CTI
5) The End User is licensed for IM & P.
IM&P >> User Management >> End User
Device Check list
1) Allow Control of Device from CTI is enabled on the phone
2) Allow Control of Device from CTI enabled in the phone's line DN
Am I missing anything else? Jabber is giving me an Error CJ:109:3 error code.
Thank you all in advance,
JP
