10-06-2022 01:08 AM
Come devo registrare questa targa nel CUCDM? BOT, SEP, TCT, ecc. ? Grazie
10-06-2022 05:50 AM - edited 10-06-2022 05:50 AM
I'm not speaking italian and translater isn't really helpful here.
But I assume, you want to register a 3rd party SIP device on CUCM. If yes, you have to configure a 3rd party SIP device in CUCM.
10-06-2022 06:25 AM
ok.
what name should i enter?
Andorid = BOT ; APPLE: TCT, ecc..
3rd party SIP: ?
10-06-2022 06:31 AM
I prefer SEP and then any dummy MAC because in most cases it's a telephone, but that's up to you.
10-11-2022 03:14 AM
I have inserted the device into the CUCDM. But it is not registered. What parameters should I enter on the device side?
10-11-2022 03:43 AM
Have you configured all the relevant parts in CUCM?
Just adding a device is not enough. You need an end user and then assign this user in the device. There are probably hundreds of similar posts about this topic, e.g.:
https://community.cisco.com/t5/collaboration-knowledge-base/how-to-register-third-party-sip-phones-with-communications/ta-p/3130315
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/sysConfig/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151_chapter_0101100.pdf
I cannot tell you, what you need to configure in the device. I don't know this manufacturar, I cannot know every type of phone in the world.
But probably you need the DN, user/pwd and outbound proxy.
You could also ask the webpages or documentation of the manufacturar for more info. This has nothing to do with Cisco in the first place.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: