cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
336
Views
10
Helpful
5
Replies

ELVOX TARGA SIP 41007

panizzo
Beginner
Beginner

Come devo registrare questa targa nel CUCDM? BOT, SEP, TCT, ecc. ? Grazie

 

5 Replies 5

b.winter
Advocate
Advocate

I'm not speaking italian and translater isn't really helpful here.
But I assume, you want to register a 3rd party SIP device on CUCM. If yes, you have to configure a 3rd party SIP device in CUCM.

ok.

what name should i enter?

Andorid = BOT ; APPLE: TCT, ecc.. 

3rd party SIP: ?

I prefer SEP and then any dummy MAC because in most cases it's a telephone, but that's up to you.

panizzo
Beginner
Beginner

I have inserted the device into the CUCDM. But it is not registered. What parameters should I enter on the device side?

panizzo_0-1665483092859.png

 

Have you configured all the relevant parts in CUCM?
Just adding a device is not enough. You need an end user and then assign this user in the device. There are probably hundreds of similar posts about this topic, e.g.:
https://community.cisco.com/t5/collaboration-knowledge-base/how-to-register-third-party-sip-phones-with-communications/ta-p/3130315
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/sysConfig/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151_chapter_0101100.pdf

I cannot tell you, what you need to configure in the device. I don't know this manufacturar, I cannot know every type of phone in the world.
But probably you need the DN, user/pwd and outbound proxy.
You could also ask the webpages or documentation of the manufacturar for more info. This has nothing to do with Cisco in the first place.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers