10-02-2019 07:20 AM
I need assist to find the best design to implement the following :
Solved! Go to Solution.
10-03-2019 09:46 AM - edited 10-03-2019 09:49 AM
Hi Ahmed,
For that, you need to enable Cisco Intercluster Lookup Service. Here is a good post on the configuration steps:
Please take a look at this Cisco Live session:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKCOL-2012.pdf
10-02-2019 09:04 AM
Hi,
You need to implement this functionality using GeoDNS. Please go through Scaling the Collaboration Edge Solution section in this architecture guide.
10-03-2019 06:13 AM
@Vaijanath Sonvane Thanks for your reply.
I already read it but How will the user in different site log even it is not under the same CUCM ?
10-03-2019 09:41 AM
You configure ILS between the clusters for that.
10-03-2019 09:46 AM - edited 10-03-2019 09:49 AM
Hi Ahmed,
For that, you need to enable Cisco Intercluster Lookup Service. Here is a good post on the configuration steps:
Please take a look at this Cisco Live session:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKCOL-2012.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: